ORDINARY COLLOID MILL

Classification

According to stucture of appearance: Ordinary Colloid Mill and Sanitary Colloid Mill

Structure The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different. But the materials are made of stainless steel or specific materials. The motor need to be designed specifically, depend different model. The motor flange should install retaining plate to prevent leakage. Usages 1. Food Industry: dairy products, chocolate, soy sauce, jam, peanut butter, butter and beverage2. Chemical Industry: paints, lubricating oil, spices, dyes, emulsified asphalt, emulsified rubber, catalyst, paint coating etc.3. Pharmaceutical Industry: cod liver oil, athlete cream, bee honey, pollen etc.4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc5. Other Industry: building industry, paper industry, plastic industry, battery industry, etcTechnical parameters

Model		JML-50	JML-80	JML-100	JML-120
Emulsification fineness um (single cycle or multi-cycle)		5~40	3~40	2~40	2~40
Adjustment range mm		1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials		0.01-0.2	0.3-1	0.5-2	0.7-3
Motor	Power kw	1.1	3	5.5	7.5
	Pressure v	380	380	380	380
	Stirring speed r/min	2880	2880	2880	2880
Grinding diameter mm		50	80	100	120
Discharge port diameter		15	25	32	40
Cooling water pipe		1/8"	1/4"	1/4"	1/4"
Dimensions	Length mm	420	520	560	560
	Width mm	280	400	420	420
	Height mm	760	900	950	950
Weight kg		45	84	113	135