plate heat exchanger for food industry and Marine application

Location:
Jiangyin, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Applications

General heating and cooling duties. Heating by means of steam, swimming pool heating.

Standard design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids

between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differentpressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Material of Plate

Suited Liquid Kinds

Stainless Steel (SUS304. 316 Etc)

Pure Water, Normal Water, Oil for eating, Mineral Oil

Ti, Ti-pd

Sea Water, Saline Water, Mineral Water

20Cr, 18Ni, 6Mo (254SMO)

Dilute Sulphuric Acid, Organic Water Solution

Ni

High-temp and concentration caustic soda

Hastelloy (C276, D205, B2G)

Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid

Material of Gasket

Operating Temperature °C

Suited Liquid Kinds

NBR

-15~+135°C

Water, Sea Water, Mineral Oil, Salty Water

EPDM

-25~+180°C

Hot Water, Steam, Acid, Caustic

F26

-55~+230°C

Acid, Caustic, Fluid

TPF

0~+160°C

Concentrated Acid, Caustic, High-temperature Oil, Steam



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Jiangyin 6Z Heat Exchanger Manufacturing Co., Ltd.
Phone Number:
  86-510-86574998-802
Fax Number:
 86-510-86574998