Application

2 module, single phase two wire active electronic DIN-rail watt-hour meter.

The meter is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.

The features of small size & DIN-rail mounting makes it is suitable for installation in distribution boards and small standard enclosures.

The meter is widely used in the office buildings, shopping malls, residences, airports and metro, etc.

Functions and Features

♦35mm standard DIN rail installation, complying with standard DIN EN50022.
♦2 module 35mm width.
♦Cyclometer display (standard 6+1 digits)

♦May select RS485 (Modbus) communication.
♦Standard configuration one port of pulse output passive (polarity).May select increase a distant port of pulse output passive

(nonpolarity). And contact with all kind of AMR system conveniently. Complying with standard IEC62053-21 and DIN43864.
♦Bicolor LED instructions respectively power supply state (green) and signal or power impulse(red)

♦Automatic detection the direction of the trend of load current. And Instructions on individual LED (Only red power impulse signal when

working. If no green power means the load current is reverse).

♦Single direction measures single phase two wire active power consumption. It is nothing with direction of the flow of load current, complying with standard IEC62053-21, IEC62052-11. Anti-tampering functions are available.

♦Directly connect operation.

♦Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install; May select extended terminal cover, which is for protecting the safety of using electricity.

Outer and Mount Dimension

Wiring Diagram