Omron Limit Switch D4C-1225-C New100%

• Approved by EN, UL, CSA, and CCC (Chinese standard).(Ask your OMRON representative for information on
approved models.)
• Sealing characteristics that meet IEC IP67 degree of protection.
• Triple-sealed construction:Plunger section sealed via nitrile rubber packing seal and

diaphragm; switch section sealed via nitrile rubber cap; cable entrance sealed via encapsulating material.
• Cable lengths of 3 and 5 m available on standard models.Models also available with UL and CSA-certified cables.
• Multiple mounting possible with Switches with Plungers.
• Models with red LED indicators added to series for easy confirmation of operation.
(Set by default to light for non-operation.)
• VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)

Handling
The bottom of the Switch at the cable outlet is resin-molded. Secure
the cable at a point 5 cm from the Switch bottom to prevent exertion
of excess force on the cable.
When bending the cable, provide a bending radius of 45 mm min. so
as not to damage the cable insulation or sheath. Excessive bending
may cause fire or leakage current.

More modles:

D4C-1225-C
D4C-1227-P
D4C-1229-P
D4C-1231
D4C-1232
D4C-1233
D4C-1241
D4C-1242
D4C-1243
D4C-1250
D4C-1260
D4C-1301
D4C-1302
D4C-1303
D4C-1320
D4C-1320-P
D4C-1324
D4C-1327-P
D4C-1329-P