7001 bearing/high quality original angular contact ball bearing

1. Low noise Z1-Z4 and low vibration V1-V4
2. Minimum friction
3. 100000 pcs of month sales

Brief description of angular contact ball bearing

The raceways of angular contact ball bearing in the inner and outer rings can have relative displacement on the horizontal axis. Therefore, this design can make it withstand combined loads, namely, supporting radial and axial loads simultaneously. The axial load capacity of angular contact ball bearing improves with the increasing contact angle. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis. The retainer is made of brass, synthetic resin of others subject to individual bearing's features and application conditions.

It uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load.

Features of angular contact ball bearing

1. Load capacities are higher than deep groove ball bearing of same dimensions.

2. Used for bearing radial-axial combined loads or pure thrust loads.

3. Low operating friction and high limiting speed.

Series of angular contact ball bearings supplied by us

PS: If you can't find the bearing model you want in the form, pls contact us directly. We always welcome any inquiry from you. Many thanks.

The foreign customers on-the-spot investigation

Jinan Shenglei Bearing Co., Ltd.

Jinan Shenglei Bearing Co., Ltd., located in China’s bearing production base—Shandong province, is a production and trade integrated company specializing in bearings.

“ZYSL” is the company’s registered trademark. The main products include deep groove ball bearings, tapered roller bearings, self-aligning roller bearings, cylindrical roller bearings, self-aligning ball bearings, angular contact ball bearings, thrust ball bearings, pillow block bearings, joint bearings, needle bearings, linear bearings, auto bearings etc. as well as ceramic bearings, plastic bearings, stainless steel bearings developed by our technical team. Our products are mainly exported to Middle East, India, Pakistan, Canada, Southeast Asia, South America, Singapore, Korea and other countries and areas.

Kindly contact me for quotation