Product's name: sip/ ip video phone with poe adapter, poe injector, (CE ROHS FCC approved)

♥Features:

Compliant with isolation and channelData and power carried over one Ethernet cableCharacteristics of IEEE802.3afDC good LEDFull protection OCP, OVPNon-vented case

♥Specifications:

Input Rated Voltage :	90VAC~250VAC
Input Frequency Range:	47Hz~63Hz
Efficiency :	85%(MIN)at Rated Voltage
Output:	5~56V MAX 2.0A
Output power :	MAX 70W
Ripple and Noise :	<120Mv at full road with 20MHz bandwidth
Turn On Delay Time:	<3S (AC:110V and full load)
Safety protection :	over voltage and current protection for power adapter
Leakage Current:	<5mA
Operating Temperature:	0°C----+40°C
Storage Temperature:	-20°C----+85°C
Certificate:	CE FCC ROHS etc
Safety Standard :	EN60950-1 UL60950-1 ESD (EN61000 3-3) CAS (60950 ITE/TE) FCC Part 15 subpart B Class B AN/NZS CISPR 22:2006
Data connector	RJ45 +Power pins4&5, Power Return pins7&8
Futures:	Compliant with Isolation and Channel Characteristics of IEEE802.3af Data and Power carried over Ethernet Cable
Application:	IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera etc…

♥Product list:

Order Model	Power	Voltage Range	Current Range	Efficiency	Ripple&Noise
Desktop Type
plus-12-d	12W	12V-56V	0-2.0A	>80%	200mV
plus-18-d	18W
plus-24-d	24W
plus-36-d	36W
plus-48-d	48W
plus-60-d	60W
Wall mount Type
plus-12-w	12W	12V-56V	0-2.0A	>80%	200mV
plus-18-w	18W
plus-24-w	24W

♥Pictures:

♥Usage:

The PoE Injector can save you money by using an existing Ethernet line to deliver data and power.

The PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch.

Reduce Wiring Costs

With the PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this product all you need to do is connect the PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.

Protect Your Equipment

Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems The PoE Injector is equipped with short circuit protection keeping your devices safe.