The TS2,TS,TSF series single-stage end-suction industrial centrifugal water pumps

Application and advantages

According to standardized series DIN24255

Performance and working limits

Capacity up to 300m3/h

Total head up to 91m

Max. pressure 1 Mpa

Max. temperature 140C

Min. temperature -20C

Description

Monobloc single stage centrifugal pumps

according to standardized series DIN 24255

Design advantages

Reduced dimensions and weight installation without baseplate

Reduce cost.

Application

TS pumps are suitable for industrial general services, refrigerated, heated and superheated water circulation in conditioning and heating systems; they are suitable for drinkable water, pressurization units, irrigation, extraction of condensate and low pressure boiler feeding. Suitable also for application in: spray booths, bottle washing plants, swimming pools, etc

Construction

Single stage pump with radially split casing, axial suction and vertical discharge.

TS pumps are coupled to the motor by means of a casing cover/motor, cast in one piece.

Shielded, grease lubricated ball bearings do not need any Maintenance. unbalanced standard mechanical seals (silicon carbide-carbon-vition ).Flanges are according 10 UNI2223 PN 16

Material:

Standard construction is: Casing and impeller in cast iron. Shaft in stainless steel AISI 240

Electric Motors:

Three phase induction motor, Protection IP55 ,insulation class B. Standard voltage is 220/380V,up to 3kW(4HP),380/660V from 4kw(5.5HP) upwards.

It is possible the use of motors with higher insulation class F and other voltage and frequency.

Performance curve and data

Photos of pumps and packages

Certification

Production Process

Rotor,stator, checking eqipment and the assmble line