lightweight concrete construction machinery

Turning over sling turns the cake(together with mould and side board) with 90 degrees in the air,conveys the cake to cutting board or cutting cart,demoulds the cake,then the cake can be cut.

Turning over sling is one of the main equipments in the AAC production equipments.

Advantages of lightweight concrete:

aerated concrete block is a kind of new building material, and has theadvantages of environmental protection. Compared with the traditional claybrick,as follows;

1.light weight

Aerated concrete density is 400kg / m3 ~ 700kg / m3, equivalent to the 1 /3 of hollow clay brick, solid clay brick is 1 / 5, 1 / 4 concrete, lightweightaggregate concrete is lower than average density.

2.insulation resistance

Aerated concrete block internal contain great amount of bubbles and pores,and has good heat preservation performance.

3.durability

most of the aerated concrete block in natural carbonation,strength wasincreased slightly

4.resistance to water penetration

Aerated concrete block with closed independent globular structure, thusabsorbing moisture slowly.

5.easy of process

Aerated concrete block not only product a variety of specifications withinthe factory , can also be used for sawing, planing, drill, nail.

6.compressive strength

Aerated concrete compressive strength for 3.5MPa, 07 for 5.0MPa.

7.fire resistance

Aerated concrete block: low thermal conductivity, heat transfer is slow,can effectively resist fire, and to protect the structure from the effects offire.

8.sound absorption

Aeratedconcrete block has a spherical closed porous structure, and thus a certainsound absorption, sound absorption coefficient is 0.2 ~ 0.3.

Services for lightweight concrete construction machinery:

Pre-sales of lightweight concrete construction machinery for customers:

1. Based on customer's requirement, we select equipment type in the principle of "Best cost performance is reached with most economical investment".

2. Provide the most reasonable program and give necessary illustration till accordant with customer.

3. Through negotiation, technical engineer can be sent to scene for layout for customer.

Mid-sales of lightweight concrete construction machinery for customers: 1. Design the technical documents such as whole equipment layout, construction bases layout, equipment installation drawings based on the scene.

2. Produce the equipments strictly as the contract when the customer is doing base construction.

3. Inspection before delivery, shipment organization and customer take-over..

After-sales of lightweight concrete construction machinery for customers:

1. Technical engineer will be sent to scene for instruction, installation and test run.

2. On-spot training for customer operator after installation and debug.

3. Irregular return visit to customer after normal production begins.

Regarding the lightweight concrete construction machinery, we can supply all the equipments from 20000cbm3-300000cbm3 with high quality and best service, we have rich experience in installing the aac block production line abroad and helping our customers to operate it well.

Contact person: Bella

sales person of International Trade Depatment

Henan Bochuang Machinery Equipment Manufacturer Co.,Ltd

Tel:+86-371-86638236 +86-15136198295

Fax: +86-371-86638233