Product name:

bubble fireproof wall materials

General Introduction:

This is a new environmentally-friendly heat insulation material, which can add a layer of PE woven cloth on the basis of the original aluminum foil and polyethyene, which greatly enhances tensile strength and tering-resistance strength without changing its original characterstics.

Technical data:
1.Thickness:5.5-9.5mm
2.Reflectivity: 98%
3.Emissivity: 0.03-0.04
4.Water Vapor transmission: 0.012 G/M2 KPA
5.Corrosion: No Corrosion
6.Tensile strength (MD)36MPa
7.Tensile strength (TD)36MPa
8.Temperature range: -50 degrees C to 80 degrees C
9.Mold and mildew: No growth10.No Linear shrinkage
11.Bubble size: 10mmX4mm, 10mmX6mm, 20mmx7mm, 25mmx8mm etc.12, Normal size: 1.2m W x 40 m L (Size can be customized as client's requirement) General structure:
1. Al/PET/CPE/buble/CPE/PET/Al 2. Al/PET/CPE/bubble/ bubble/CPE/PET/Al 3. Al/PET/CPE/white fire retardant bubble/CPE/PET/Al
4. (Any color) Al/woven/CPE/bubble/CPE/PET/Al

Advantages:
1.Smellless and non-toxic
2.Clean,thin and lightweight
3.Outstanding safety and environmental benefits
4.Moisture-proof, heat preservation and energy conservation
5.Easy to install,high efficiency
6.Cost-effective and versatile



Application:
1. Used in Roof
2. Used in Attic Insulation
3. Used in Stud Walls Insulation
4. Used in Crawl Spaces Insulation
5. Used in Under Concrete Barrier&Insulation
6. Used in HVAC Duct Insulation
7. Used in Metal Building Insulation
8. Used in Post Frame Building insulation
9. Used in Water Heater Insulation Blankets or Jackets
10. Used in Radiant Floor Insulation
11. Used in Garage Door Insulation