1. Introduction

TUS-V100 ultrasonic parking lots detector is used to detect weather the vehicles is being or not with the set distance by the way of ultrasonic reflection. The work principle is according to the ultrasonic which was send from up to down by the ultrasonic detector, detect exactly weather every park lot is occupied or not and the information will be send at last.

2. Features

Industrial design

Advanced ultrasonic detect mode

The advanced way of detection is used. the misforecast question caused by the outside disturbance or the environment changing is hard to be happened like the other detection way of infrared way or microwave ;

With Highly Anti-disturbance capability to avoid wrong judgment.

Easy to install and maintain.

The adjustable height range is 1.0m to 3.5m.

The height brightness diode indicator light indication detective status;

1S or 5S of sign output delay can be choosing through the outer switch.

3. Technical dataOperating Voltage: 12VACOperating temp.: -20°C to 65°CStorage temp.: -40°C to +85°COperating relative humidity: 30%-90%Used condition: installed on the parking lot it usually installed with the probe down in ceiling in a way of suction top.Shell dimension: diameter10 centimeters× height 4.5centimetersweight :140gHeight range 1.0-3.5m (adjustable)4. Communication Interface4.1 Power and bus communication protocol

Power interface		RS485 communication interface
V-	V+	B	A
AC12V		Connection 485B	Connection 485A

4.2 Externally connected LED light interface

+5V	0V	Red	Green
Connect LED light +5V	Connect LED light 0V	Connect LED red light	Connect LED green light