All

dc power supply and high frequency rectifier system

Location:
Shijiazhuang, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Electronics & Electrical > Power Supplies

Product Description

dc power supply and high frequency rectifier system detailed specification:

Parameter 380V AC input, 220V DC output power module380V AC input, 110V DC output power module220V AC input 220V DC output power module220V AC input 110V DC output power module
TH230D05ZZ-3TH230D40NZ-3TH110D10ZZ-3TH110D40ZZ-3TH230D05ZZ-220ACTH230D10ZZ-220ACTH110D10ZZ-220ACTH110D20ZZ-220AC
InputInput voltage380V AC±15%, 3 phase220V AC±15%, single phase
AC input frequency45Hz ~ 65Hz45Hz ~ 65Hz
Efficiency≥95%≥95%
Power factor≥0.93≥0.93
OutputOutput voltage190-300V95-150V190-300V95-150V
Output current0.5-5A4-40A1-10A4-40A0.5-5A1-10A1-10A2-20A
power (W)150012000150060001500300015003000
Start delay3 ~ 8s3 ~ 8s
Current stabalization≤ ± 0.5%≤ ± 0.5%
Ripple≤ 0.2%≤ 0.2%
Voltage stabalization≤ ± 0.5%≤ ± 0.5%
Inter-rectifier Current sharing imbalance≤ ± 3%≤ ± 3%
Cooling methodNatural cooling with heat sinkNatural cooling with heat sink
ProtocalRS485 or RS232RS485 or RS232
Accoustic noise<50dB<50dB
ProtectionMulti-protectionMulti-protection and Warning, including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared.
Automatic current limitingThe output current will keep fixed without increase after it exceed the set-point, set-point adjustable.
Intelligent function-microprocessor controlmanual control(1) Output DC voltage and current adjustable, output over or under-voltage set-point adjustable, output over-current set-point adjustable.
(2) Intelligen battery management, including automatic switch between boost charge and float charge, time and point seting for boost charge and float charge.
(3) Detecting AC input, detecing battery voltage & current and temperature, automatic adjusting the charging voltage according to the battery temperature (need Complex Information Detector and Battery Detector).
(4) Detecting the bus and branch insulation status (need Insulation Status Detector ), detecting the switch status (need Switch Status Detector )
(5) Battery discharging managment (need Battery Detector )
4 remote processing4 remote processing though RS485 with detector :
Remote signaling : transmit signal to the monitoring system, such as AC input fault, input over or under voltage, rectifer and battery over temperature ect.
Remote measuring : measure DC output current and voltage, shows in the rectifer LCD and transmit to the monitoring system.
Remote controlling: control the rectifier power on/off, control the switch between boost charge and float charge.
Remote adjusting: adjust the output DC voltage and current.
EnvironmentOperation ambient temperature-20°C ~ 50°C
Storage temperature-40°C~ 60°C'
Relative humidity≤ 90%
Air pressure70 ~ 106kPa
SafetyInsulation resistanceI/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
Dielectric strengthImpose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
MechanicalSize (H × W × D) mm218×116×260303×136×410218×116×260355×154×400218×116×260263×139×325218×116×260263×139×325
Weight5.2kg19kg5.2kg16kg5.2kg9kg5.2kg9kg

Features:

Patent technology, soft switch during the whole switching process.

High efficiency : ≥95%

Small size, light weight

Natural cooling with heat sink, low failure rate

CE, RoHS, UL approval

Compatible detecting module is available, including monitoring system, insulation status detector, battery detector, Complex information detector etc.

Adopt protocal CDT or MODBUS, with interface RS232 and RS485 betwwen the detecting modules.

The software and program on the module could be customized according to your requirements.

Rectifier Module

Integrated DC power system

Main Features:
(1) modular design characteristic of switching power supply
(2) redundancy hot standby
(3) adjustable to various power networks with super-wide voltage input range
(4) rectifiers being hot-pluggable, convenient for online maintenance
(6) with the patent switching technology, the rectifiers features high efficiency with low EMI
(7) low difference active load sharing of rectifiers ensures inter-rectifier imbalance rate of only 3%
(8 ) CE safety and EMC certified rectifiers, ensuring reliability and safety
(9) open interface design with strong communication function, RS485, or RS232
(10) automatic battery management and protection, with real-time monitor function over battery operation state and parameters

Main Component:
(1) AC input distribution: AC distribution cabinets.
(2) Rectification: rectifiers and insulation diodes
(3) DC output distribution: diode chain, IMS, switching branches (connected to the switching bus), and control branches (connected to the control bus).
(4) Monitoring system: power control unit (PCU) and distribution monitoring box.
(5) All the modules and components could be customized accordingly.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shijiazhuang Tonhe Electronics Technologies Co., Ltd.
Phone Number:
  86-311-66685638
Fax Number:
 86-311-86080409
 
Shijiazhuang Tonhe Electronics Technologies Co., Ltd.
 Hebei , China FREE
 

Resources