Set into:

since the crosslinking special copolymer, weak cation

used for cellulose fiber and their blended pigment printing of the crosslinking agent.

- white emulsion;

- 20 °C when the specific gravity of about 1.0 g/cm3.

- pH is about 6-7;

- very soft handle;

- good compatibility with coating

- good fastness, for dark color.

Should be used:

WDCO - GUARD EPV003 suitable for cellulose fibre and its blended fabric with different process of pigment dyeing.

5-20 g/LWDCO - GUARD EPV003

Crosslinking agent depends on:

- the composition of the material and type

- use process

- expect to handle

- need to fastness properties

Storage:

storage if stored in below 0 °C, the product could be cured or change consistency, it is heated to 20 -- 25 °C and after mixing, can be used as usual.

This product is sensitive to heat, don't stored in more than 40 °C, otherwise may lead to irreversible qualitative change. If the storage temperature is too high, before use should be test in advance.

In order to guarantee the product quality, be sure to cover the lid after each use.

the above suggestion is based on our actual experience and sufficient research, however, they are the property rights of third parties and shall not be liable for any foreign law. Users should test it in person, whether products and use suitable for his purpose. For have not written to the application of the method and the field, we shall not be responsible for. About the marking procedures and protective measures, please refer to the relevant safety data sheets.