Opaque Plastic Panels Specifications:

Thickness:0.6mm,0.8mm,1.0mm,1.2mm,1.5mm,1.8mm,2.0mm,2.5mm,3.0mm,or as per buyer required.Width:as per buyer requiredColor: Standard RAL colors,such as clear,red,green,blue,yellow,white,etc,or customized as per buyer required.Drawing Profiles:more than 300profiles in stock for your choose or customized as per buyer required.Guarantee:15years guarantee provided.

Production Structure for Opaque Plastic Panels:

FRP(Fiberglass Reinforced Polyester) Structure consist of Fiberglass,Reinforced,Polyester.The raw-materials are Fiberglass,Resin,Film.

Opaque PLastic Panels Technical Property:

1.Corrosion Resistance

2.Strong Strength

3.Aging Resistance

4.Chalking Resistance

5.Self-cleaning

6.Yellowish Resistance

7.Cheaper Maintenance

8.Excellent Performance

Opaque Plastic Panels Physical and Chemical Data Sheets:

1	Tensile Strength	100Mpa
2	Tensile Module	3700Mpa
3	Flexural Strength	190Mpa
4	Flexural Strength	4000Mpa
5	Barcloe Hardness	40gm/cm3-45gm/cm3
6	Fiberglass	27.50%
7	Polyester Resin	72.5%
8	Fire Retardant Co-efficient	27.10%
9	Thermal Conductivity	0.6w/mk
10	Heat Resistant Temperature	-50°C to 130°C
11	Anti Ultraviolet Rate	98%-100%
12	Thermal expansion co-efficient	2.75X10`5cm/cm degree
13	Viscosity	250-350cps
14	Solid Content	58.2-67.4
15	Unit Weight	2.4kg/m
16	Tensile Elongation at break	≥2.5%
17	H.D.T	75°C
18	Light transmission	≥80%

Opaque Plastic Panels ideal for Allowing Light In All Types of Buildings

Industrial

Roof Lights for Warehouses Roof Lights for Workshops Roof Lights for Steel Structure ProjectRoof Lights for Storage Facilities

Agricultural

Roof Lights for Barns Roof Lights for Farm & Storage Buildings Roof Lights for Stables Roof Lights for Greenhouse ProjectRoof Lights for Cattle Sheds

Domestic

Roof Lights for Garages Roof Lights for Lean-to's Roof Lights for Sheds Roof Lights for Car Ports

Opaque Plastic Panels Sales Team Service:

Professional and experienced sales teamExperienced documentary team.High efficiency shipping team.Competitive pricesDelivery service available(subject to terms and conditions)All enquires welcome

Opaque Plastic Panels Guarantee Paper:

According to different Rooflight thickness ,we have 15years,20years and 25years guarantee papers provided for customers.All Rooflight installation should be comply with right instructions.

Opaque Plastic panels Fixing Instructions:

1.Drilled Holes:

Holes for fixing should drilled and not punched and should be 2mm larger in diameter than the fixing accessories.

Roofing bolts and nuts.Self-tapping screw with sealing rings and washers.

Washers minimum 32mm should be incorporated with the above fixings,complete with suitable sealing rings or washers.

Where sheets with corrugations over 25mm depth are fixed through the crowns to intermediate purlins.Shaped packing pieces should be located between the crown of the sheet and the support.

This should allow the fixing to tightened sufficiently without distance the profile of the sheet.

Fixing should not be located less than 50mm from the ends of sheets.

2.Side laps:

All side laps should be stitch (seam)bolted at maximum 300mm(12in)centers for roof pitches below 10 and maximum 375mm(15in) centers for roof pitches 10 and over.

In vertical cladding applications all side laps should be stitch(seam) bolted at maximum 450mm(18in) cenetrs.

3.End laps:

Minimum end laps,if unsealed,should be as follow:-

Below 15o roof pitch–not recommended .

Over 15o roof pitch–300(12in) lap.

Over 22,1/2o roof pitch-150mm(6 in) lap.

Where sealed end laps are used a minimum 150mm(6 in) lap is sufficient.

It is recommended that sheets should not overhang supports at eaves by more than 230mm.

4.Sealing:

Side laps between FRP sheets should always be sealed,using closed cell P.V C. self adhesive type or mastic sealing strip.

Side laps and end laps between FRP and other roofing materials on roof pitches 15o or less should always be sealed using closed cell P. V.C. self –adhesive tape or mastic sealing strip.

On steeper roof pitches ,where FRP Sheet is used in Conjunct ion with other roofing materials, side mend laps Should be sealed to the same specification as for the other materials.

5.Flat Sheeting:

FRP Flat Sheets should be supported at all edges and support centers should be no Grater than 610mm at least one direction.

Opaque Plastic Panels More Pictures

Opaque Plastic Panels Loading pictures:

Customers Scope

Any requirements,please contact Mr Robin Chao,+86 13372568158