PWM/ Resistor 2-in-1 Dimmable function Non-Waterproof LED Driver.

Descriptions:

1. Resistive dimming – 100K potentiometer, variable resistance across the internal control voltage from a driver therefore does not require an external voltage.

2. PWM Signal dimming – PWM is also known as pulse width modulation; this is where an external circuit is used to control the average voltage to the dimming input.

We offer a dimmable power supply range with 2-in-1 dimming – This combines the types of dimming, PWM and resistive dimming.

Features:

1. PWM+Resistor dimming mode.

2. Isolated and 2 stages circuit.

3. Built in active PFC function, power factor: ≥0.98

4. Dimmed by potentiometer, easily operated.

5. Typical DC Current: 200-470mA adjustable, DC voltage: 65-100Vdc(can be custom-made).

current can be adjustable by your need through potentiometer.

6. Plastic case, IP40.

7. Input and output with terminal blocks.

8. Widely used for LED Panel Lights.

9. Zero ripple of current, high efficiency, energy-saving and eco-friendly.

10. Built in test: 100% for at least 4 hours under environment temperature of 40 degree

11. Warranty: two years.

12. DC Voltage and DC current can be customized.

13. Supply ability: 50000pcs/ month.

Parameters:

MODEL		CUF-047-047-EC2
OUTPUT	DC VOLTAGE	65~100V
	RATED CURRENT	200~470mA
	RATED POWER	47W(MAX)
	Ripple of Current	<1%,
	VOLTAGE TOLERANCE	10%
	LOAD REGULATION	±2.0%
INPUT	VOLTAGE RANGE	90-264Vac
	FREQUENCY RANGE	47~63Hz
	POWER FACTOR	PF≥0.98
	EFFICIENCY(Typ.)	88%
	AC CURRENT	0.61A Max
PROTECTION	OVER CURRENT	±5% rated output current
		Protection type: Constant current limiting
	SHORT CIRCUIT	Hiccup mode
	Over temperature	Protection type: Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-30°C~+70°C
	WORKING HUMIDITY	10%RH~100%RH non-condensing
	STORAGE TEMP., HUMIDITY	-40°C~+80°C10~95%RH
SAFETY& EMC	SAFETY STANDARDS	IEC/EN60598;IEC/EN61347;CB
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC
	EMC	EN55015/EN61547/EN61000
OTHERS	IP RATING	IP40
	MTBF	60000Hours
	DIMENSION	150*40*28mm(L*W*H)
	PACKING	120g/pc; 24pcs/ctn

Applications:

LED panel lightingElectronic LED displaysDecorative LED lightingLED stage lightingLED signs

For connection, there are two ends, one end of the AC input terminal, it contains the “L” “N” and “G”, which can be inserted with wires’ diameter of 2.5mm².

The other end for the DC output terminals, one end of the negative DC output “LED-" Gray; the other end of the DC output positive "LED +" Red.

Note 1: When connecting the driver to LED lights, please pay attention to the input, the output of the correct security access;

Note 2: To avoid LED burned out, please connect the DC output side before connecting the grid;

Note 3: When using this product, please pay attention to the high-pressure safety and good anti-shock measures.

For more information, please contact us.