Plastering machine for building plaster machine

Product Description

We are engaged in manufacturing several models of building plaster machine

This wall rendering machine plasters the internal bricks/ block walls at the rate

of 20 times faster than the manual labor. The cost effectiveness of this wall rendering machine is highly evident in saving money and time and is perfectly suitable for

infrastructure building industry. We offer this machine in line with the global quality standards. It is suitable for construction industry. It will make rendering easier, faster,

and effortless. Compared with manual operation, the wall rendering machine can work with different mortar and adjustable thickness to suit each operation.

XJFQ1000, this model building plaster machine is the extended version of all our plastering machines. It gathered all the advantages: mini size, flexible operation, best plaster

effect, simple structure and light weight. Especially suitable for small rooms.

Features:

1. Our machine utilize the conveyor taking mortar forwardly and upwardly,It can plaster to the roof by all means(no leave 1mm).In this aspect our machine is unique.The conveyor can take mortar or stop in any position by hand control.

2. The spatula can change the angle at will,plastering the wall by rising large angle,sharpening and pressing by angle decline,thus guaranteed zero vertical error and plastering to the roof.

3. The hydraulic telescopic rod can make the machine installation in 10 second and the chassis is not stress.When you want to move the machine you just can release the rod as moving jack.

The main rod declined by gravitation,the bottom life automatically.This kind of installation is the most fast and stable one.

4. The width of spatula is designed according the width of the door,The machine can go into the room freely.It can reach the inside corner and the exposed corner.

5. There are two min-vibrators after the spatula,thus you need not to worry about Hollowing and adhesion.

6. Our machine adopted the universal wheel after sealing and it can easily move to any place you like.

7. This building plaster machine is totally artificially designed.

8. The capacity is as 15 professional plasterers.

9. Saving more than 20% raw material (cement &sand)

10. Hydraulic lifting methods to improve the stability of the machine.

Working process:

Unique design of our building plaster machine:

1.Before changing the plastering angle, the switch refuse to startup, then avoid the damage of scraping board.

2.If the motor reverse, it will cut the power automatically XJFQ-1000 spray plaster machine to protect the wire from mass. Commutate the switch is OK.

3.If it got stuck when descending, the machine can cut the power automatically XJFQ-1000 spray plaster machine to avoid wire sling clipping.

4.Long time exposure outside, the wire will become rough, so if it broken, the machine will get stuck for abnormal descending speed.

5.All the machine accessories are from the most popular companies in the world.We can guarantee it must be a high quality XJFQ-1000 spray plaster machine,high efficiency XJFQ-1000 spray plaster machine,and strong technical one.

6.Although XJFQ1000 spray plaster machine oil looses, it will not down back for its front heavy XJFQ-1000 spray plaster machine.

Safely protection designing:

1. Before changing to the plastering angel,the startup switches of spatula is closed to avoid damage the spatula.

2. If the electrical machinery reverse,the machine can cut the power automatically to protect the wire rope from mass.Just commutate the two direction switch.

3. If the machine got stuck when declining,the power will be butting automatically to avoid wire rope came messy.

4. Due to longterm exposure,the wire rope may came rough.If the wire rope broken,the machine would decline 20cm in abnormal speed and then it would be stuck.

5. All the active parts and tighten bolts have a high degree of anti-rust treatment.All the bearings have been multiple sealed up.All the accessories came form the best factory in China.

6. The front heavier design make the machine do not backward also if the hydraulic cylinder became flexible.

Technical Paramater:

XJFQ-1000 building plaster machine
Efficiency	450m2/8h	Weight	240kg
Plastering height	5M below	Plastering thickness	2-25mm
Total power	2.2kw	Voltage	220V/380V
Size	1350*800*500mm	Material	Stainless steel

Packaging & Shipping

Packing: In standard wooden case

Delivery time: 2 - 3 days

Delivery ways: By sea, by air or by car

Our Services

Pre-sale Service

1.Supply item design,process design.

2.Help you to chose the fittest machine.

3.Making the machine according to your requirement.

Sale Service

1.Acceptance equipment together with you .

2.Help you to make the method statement and the details of the process.

After Service

1.Guarantee for a year.

2.Quality problem,we will sent you the accessories.

3.Free repair whole using life(without the freight and accessories charge).

Our contact ways, welcome to contact with us!

Company Information

Xingtai Greatcity Commercial Co.,Limited was founded in 1990.Specialized in machinery export,has been in this field for more than 20 years.

The building plaster machine are our advantages machine.

These machines now export to all over the world such as Asia,Africa,South America,

Australia and so on.

....