All
Home > Products > Industrial Supplies > Metallic Processing Machinery - 278 Products
 
Welded Mesh MachineDescription:1).size of mesh:12.7mm-101.6mm(1/2"-4") 2).width: 914.4-1219.2mm(12"-48")3).diameter of wire: Φ0.63- Φ2mm(BWG25-BWG19) 4). Biggest rolled net size: 120m(400')5).Welding speed: 65radia (mesh/minute) 6).Power: 380/220V 50-60Hz 50KWA×4 Type and Specification:1.Used for welded wire..
 
Expanded Metal Machine1.Truss wire: 2mm -2.8mm Galvanized.2.Mesh Wire Diameter: 2.0mm -2.8mm. 3.Mesh Hole: 50mm*52mm.4.Panel length: 3000mm or 6000mm. 5.EPS Insulation Core: 50-100 mm, Self Extinguishing.6.Mesh wire material: Low carbon steel wire. Expanded Metal Machine are used for punching shear fhe cold crimped engine bed with the..
 
Crimped Wire Mesh MachineThe series of automatic crimped wire mesh machine can finish the work from making the wire crimp to formation of the net automatically. Breadth of the net is 0.9-2.5m and the diameter of the wire is 0.4-2.2mm. The size of the mesh is 1×1-20×20mm2.Semi-automatic Crimped Wire Mesh MachineThe series of..
 
Chain Link Fence MachineThe chain link is automatically wound to form rolls when the desired length is manufactured.The machine is controlled by PLC automatic controller, so only one person is needed to operate it.One side or both sides of the end of net hole is twisted or with burr in edge.Chain link fence machine for manufacturing chain link..
 
Expanded Metal Machine:The machlnes are used for punching shear fhe cold crimped engine bed with the thickness of 1.2- 2.5mm the width of 2000mm Material strength of 450N/mm2, The specifications of punching shear are su~eyed by the bit of TB5-20 mesh grid plate:if the TB TL are changed the punching shear knife is also changed:TB.TL are..
 
SF1325 metal processing machineSpecification:ModelSF-1212 CNCX, Y, Z working area1220mm x 1220mm x 120mmTable size1450mm x 2100mmX, Y, Z traveling orientation accuracy±0.03/300mmX, Y, Z reorientation accuracy±0.02mmFrame structurecast steelX Y Linear guide rail z linear guide railMax consume power4kWMax. speed0-5,000mm/minMax...
 
metallic processing machine mainly used in precise cutting work for foam sponge vertical slice and foam sponge formation while 2.can process all kinds of paper class EVA ,EPE,paper board ,,and pearl sponge .typestandard/largecutting height900mmknife length6900mm/7600mminner working table size1320x2500mm/1650x2500mmworking table outside..
 
SF1325 metal processing machineSpecification: ModelSF-1212 CNCX, Y, Z working area1220mm x 1220mm x 120mmTable size1450mm x 2100mmX, Y, Z traveling orientation accuracy±0.03/300mmX, Y, Z reorientation accuracy±0.02mmFrame structurecast steelX Y Linear guide rail z linear guide railMax consume power4kWMax. speed0-5,000mm/minMax...
 
modelshearing sizeshearing angleSpare travel times (times/several)adjusting range block..
 
Technical performance:The upper roll can move vertically as well as horizontally.It has double function of pre-bending and rounding. The upper roll is in drum-type,and support roll is added to the lower roll.Through regulation of the support roll.it can roll high precision products to the extent of thin-thick plates.Realize NC control and..
 
Signage MachineQL-3030Characteristics:1 Casting of a host, the base used box structure. Precision Linear rectangular guides, Preload, steel and good, high accuracy.2 Ground-level precision ball screw is tightening and high precision.3 Interface use of international standards G code instructions, carving compatible software at home and..
 
Spiral duct forming machine HJTF1500(Saw Cutting)Diameter range 80-1500mmMain Technical Date:Diameter rangeΦ80-Φ1500mmTube Length120-8000mmThickness of Strip0.4-1.2mmWidth of Strip137-140mmStrip Speed1-45/minLockseamOutside tube,on the inside on requestControl SystemPLC automatic controlElectric Power380V/3PH/50HZ(Acorrding to..
 
JD-360 excellent water tank type metallic processing machinery 1.Inletwire diameter:3.2mm2.Outletwire diameter:0.6mm3.Main power:55KWFeature:1.Factory export.2.High quality and competitive price.3.We can design the machine that meet your requirements.4.Excellent after-sale service.Usage :The machine is used for drawing electrical copper rod..
 
For the specification and detailed information of the Vertical Drilling Machine,please see the photo.1. Column type of vertical drilling machine; 2. 3-phase with two- voltage for 220V~575V collocation; 3. All main parts are made with quality cast iron; 4. Single-speed motor, 9 or 12 step gear speed; 5. Strength spindle, large diameter column;..
 
KHGC Tube To Tube Automatic Orbital Welding Machine Application Industry: Industries such as medicine and chemical, food, biological engineering, refrigeration equipment, electronic equipment, instruments and apparatuses.Applicable Scope: Automatic TIG welding (without wire) of thin-walled tube for carbon steel, alloy steel, stainless steel..
 
For the specification of the Vertical Drilling Machine, pls see the photo : ModelZ5150AZ5150BZ5140AZ5140BMax. drilling diameter50mm50mm50mm50mmSpindle taperMT5MT5MT4MT4Spindle travel250mm250mm250mm250mmSpindle box travel(manual)200mm200mm200mm200mmSpindle speed steps12121212Spindle speed..
 
Technical performance:The upper roll can move vertically as well as horizontally.It has double function of pre-bending and rounding. The upper roll is in drum-type,and support roll is added to the lower roll.Through regulation of the support roll.It can roll high precision products to the extent of thin-thick plates. Realize NC control and..
 
W11s-40x3500 Roll Bending Machine, plate rolling machine, Metallic processing machine, plate bending machine Parameter: Upper roller force: 320 Tons. Diameter of the upper roller Φ450mm Diameter of the lower roller Φ250mm. Central distance between bottom shafts 400mm Max width of coiled plate 2000mm Length of working rolls 2100mm Max..
 
The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the..
 
The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the..
 
 
 

Resources