Chain Link Fence Machine

The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.

Chain link fence machine for manufacturing chain link fences of different sizes. The wire is taken in from
the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes.
After passing from the die, the diamond pattern wire is automatically thrown on the winding shaft in the
stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch
to take place.

This machine is to produce chain link fence mesh using either galvanized wire or pvc coated wire materials.
Its production output is about twice as much of the standard model . It can produce both standard and
compacted rolls by the adjustment in the coiling speed.For more information, please contact us. Please
provide the specifications of the chain link fence mesh you want to produce

Specifications:

Width scope of weaving	1-4 m
Diameter of wire	2-5 mm (depend on the mesh size)
Mesh Size	30-80 mm
Speed of the axle of shaped knife	275-1100 rpm (variable speed)
Total Power of equipment	11kW
The output per minute	If the mesh is 50*50mm, width: 2m, the output will be:≥1m/1min.
Suitable wire to the machine	The tensile scope of the wire 300-500N/M2
Weight of equipment	4200 kg
Outside size	6700*1430*1800 mm