Expanded Metal Machine1.Truss wire: 2mm -2.8mm Galvanized.
2.Mesh Wire Diameter: 2.0mm -2.8mm.
3.Mesh Hole: 50mm*52mm.
4.Panel length: 3000mm or 6000mm.
5.EPS Insulation Core: 50-100 mm, Self Extinguishing.
6.Mesh wire material: Low carbon steel wire.

Expanded Metal Machine are used for punching shear fhe cold crimped engine bed with the thickness of 1.2- 2.5mm the width of 2000mm Material strength of 450N/mm2, The specifications of punching shear are su~eyed by the bit of TB5-20 mesh grid plate:if the TB TL are changed the punching shear knife is also changed:TB.TL are increased. the punching shear strength is reduced:TB.TL are reduced. the punching shear strength is increased In order not to damage components for the excess load The nominal tonnage is 63T lf TB.TL are reduced the punching shear strength surpasses the nominal tonnage. you can reduce the material thickness and width.

Specification:

Specification (mm)	Max.Breadth (mm)	Max.Wire Dia.(mm)	Weaving-veinNumber	Speedof MainAxle	Power (kw)	Theoretical Manufacturing Speed		Exterior Size	Weight (Ton)
						MeshHole Count/Minute	Meter/Hour	LengthxWidthxHeight
60x80	2300	2.7	3	25	11	25	165	5200x1400x2400	13
	3300	3	3	25	15	25	165	6200x1400x2400	14
	4300	3	3	25	22	25	165	7200x1400x2400	15
80x100	2300	3	3	25	11	25	195	5200x1400x2400	13
	3300	3	3	25	15	25	195	6200x1400x2400	14
	4300	3	3	25	22	25	195	7200x1400x2400	15
100x120	2300	3.2	3	25	11	25	225	5200x1400x2400	13
	3300	3	3	25	15	25	225	6200x1400x2400	14
	4300	3	3	25	22	25	225	7200x1400x2400	15