Industrial RO water treatment equipment:

1. Delta Brief introduction:

Delta series is mainly used in industrial field with large capacity.The range of capacity is above 4TPH,even reach to 100TPH.Its operation is easy and with good quality,The pre-treatment and post-treatment can be added to the system depending on client's choice.

2.Features:

1).Large capacity,specially suitable for industries
2).Lower cost and easy operation
3).High rejection rate with concentrate recycle system

4).Cleaning in place system is optional if necessary

5).Open-frame design,easy to operate and maintain

6).Enviromental protection

3.Standard Features
T.F.C.R.O membrane with 99% salt rejection
FRP pressure vessel
SS centrifugal pump
A3 power coated frame
5micron sediment prefilter
Product water flow meter
Concentrate water valve
Pressure gauge
Low pressure shut-off switch
Concentrate washing shut-off valve
Pumpexit of regulate valve

Optional Features
304SS pressure vessel
CIP system
Concentrate recycle
Chemical dosing

4.Raw water requirement:

minimum raw water pressure:40PSI(2.8KG/CM2)

minimum water supply flowrate: 3.6T/H

water temperature:4 oC~45 oC

PH:4~9

hardness:17mg/L(CaCO3)

turbidity:SDI<5

Total dissolved solids:TDS<1000mg/L

Fe:<0.1mg/L

Free chlorine:none

Mn: <0.05mg/L

Organic matters: <1mg/ L

5.Specification:

6.Some certificates

7.Delivery and packing