Water proof building adhesive

Main composition

Epoxy resin, organic modified amine, quartz powder

Application

Bonding hanging parts for internal or external stone wall

Reinforcing or bonding the precast concrete or structure frame

Bonding or pattern making for the tiles and marbles

Fissure filling for concrete

Joint for tiles, brick and concrete, etc

Main properties

Fine aging resistance, strong tenacity, water-proof, moisture-proof, Chemical resistance, weather resistance(-10-90°C)

High thickness adhesive with no liquid dropping and high utilization ratio

Fine quake-resistance, super shock resistance, high compression strength and tessile strength, etc

Non-corrosion, no harmness to human body.

Clean operating environment, low construction cost, reducing the process of lime and sand transport and the expense of silt displacement

Physical characteristics

Part A

Part B

Technical data

Attention

Make the bonded surface rough

Operating temperature: -10-45°C

Do not move the bonded parts until it solidfied completely

Heat the adhesive to 30-40°C if used in winter

Do not operate in the wet place

Effective operating period for mixed adhesive is 15 minutes

Do not pour the excess adhesive back to the cans

Clean the tools immediately with acetone after using

Keep away from children to aviod eating mistakely

shelf life: 12 months in dry and ventilate place, if the quality is tested unchanged after gurantee period, it could be still used

pls carefully read the operating instruction on the package before using

Instruction

bonded surface must be clean, no laitance, no dirt, no loose mortar, no oil, etc

Mix A with B according to the ratio 1:1 and stir them fully until the mixture color is uniform

Paint the bonded surface evenly with the steel scraper or othe tools like this

Package

We also could pack it as your per requirement.