high quality low cost comfortable living prefab homes

Energy Saving, Excellent Performance

Heat Preservation: Major material for wall panel is anti-freezing, heat preserving and environmental friendly. Heat Insulation: Adjust the indoor temperature at a constant range. Fire Proof: Both face sides with 4.5mm calcium-silicon fire proof board, thus DQ Eps and Cement sandwich panel can be against a high temperature of 1000°C for 4 hours. Water Proof: Tests has proved that water containers can be made by DQ Eps and Cement sandwich panel without absorbing functions and no leakage at all. Sound Insulation: The inside of DQ wall panel material (EPS polystyrene grain) has fine sound insulation and sound-absorbing functions. Easy Construction ProcessEasy to Install: Using our installation material (PU Foam and Cement Adhesive) is easy to build house.Shorter Time: For a 50sq. house, using DQ Eps and Cement sandwich wall panel, three people can finish it within ONE day, while using traditional block, it will take at least SEVEN days with ONE WEEK to finish.High Security performanceHigh Intension: DQ Eps and Cement sandwich wall panel can be nailed directly or have expansion bolt to lift and hang heavies, it can be covered by ceramic tile, wall paper, wood panel, coating etc. Earthquake Resistance: The Seismic performance of DQ Eps and Cement sandwich wall panel is at a magnitude of 8.5. Space and Cost SavingSpace Saving: DQ Eps and Cement sandwich wall panel with the thickness of 60mm-180mm, as a thin and solid new type construction material, it will save a lot of construction space compared with the traditional block. Labor Cost Saving: As DQ wall panel is easy and fast to construct. Foundation Cost Saving: As the weight of DQ wall panel is only 1/12 of traditional block, it will save 2/3 cost on construction structure.Performance Index:

NO. Item National Standards Testing Results

60mm 90mm 120mm 60mm 90mm 120mm

1 Anti-impact Capacity/times ≥5 ≥5 ≥5 ≥8 ≥10 ≥15

2 Anti-bending damage load/times over deadweight ≥1.5 ≥1.5 ≥1.5 ≥3 ≥4 ≥5

3 Compressive strength /Mpa ≥3.5 ≥3.5 ≥3.5 ≥5 ≥5 ≥5

4 Softening coefficient ≥0.80 ≥0.80 ≥0.80 ≥0.80 ≥0.80 ≥0.80

5 Surface density g/m2 ≤70 ≤90 ≤110 ≤55 ≤70 ≤85

6 Moisture rate a/% ≤12/10/8 ≤10/9/7

7 Drying shrinkage value /mm/m ≤0.6 ≤0.6 ≤0.6 ≤0.45 ≤.0.5 ≤0.5

8 Single point hanging

Strength /N ≥1000 ≥1000 ≥1000 ≥1200 ≥1300 ≥1500

9 Sound insulation capacity in the air /Db ≥30 ≥35 ≥40 ≥35 ≥40 ≥45

10 Fire proof limit /h ≥1 ≥1 ≥1 ≥2.5 ≥3 ≥4

11 Heat transfer coefficient b/w/m2. ≤1.0 ≤1.

Dimensions

Length: 1500-3000mm, 2270mm is the first suggestion.

Width: 610mm, 600mm

Thickness: 50mm,60mm,75mm,90mm,100mm,120mm,150mm,180mm

Application and Markets:

DQ Eps and Cement sandwich wall panel as a prefabricated non-load bearing wall panel, can be widely used as internal wall, external wall, floor, roof on steel or concrete structure of project such as hospital, hotel, school, office building, apartment and so on, for new construction, addition or renovations.

It has been exported to South Asia, Middle East, North Africa etc, more than 40 years around the world, which include Australian, Cyprus, Iranian, India, Kazakstan, Kirghiz, Libya, Malaysia, Nigeria, Qatar, Russia, Saudi Arabia, South African, Turkish, Thailand, UAE, Ukraine, etc.