briquette coal/charcoal carbonization stove

Basic introduction of carbonization furnace:

1.The carbonization of the old-type furnace takes advantage of spontaneous combustion of biomass briquettes. But the new-type furnace adopts the dry distillation of charcoal technology and also the output charcoals are with good quality and show

metallic luster.
2. The production of old-type is sporadic, and the new type is continuous which improves the production efficiency to a great extent.
3. The old-type makes plenty of heavy smoke, even if with the cooling treatment, it still brings the serious air pollution. Different from

the old type furnace, the new type does not exhaust the heavy smoke from the carbonization process to the air, oppositely,

it collects. The smoke goes into the burner through the pipes and burns as fuel gas for recycling use, to reach the aim of

replacing the normal fuel and continue the carbonizing process.The design of new-type furnace avoids the air pollution of heavy smoke exhausted.
4. The operation of old type is quite complicated, before carbonization, the briquettes need to be put properly which wastes

too much time and labour. However, the briquettes can be put irregularly and then process carbonization directly, saving

much time and labour.
5. The production efficiency of the old type is low. Every 24 hours, the output of 5m³furnace is only around 1 ton. By

contrast, due to the design of continuous production,the new-type furnace can produce around 200 kg charcoals every 1-2 hours, The efficiency of the new type is completely 4 times more than the old-type, which greatly reduce the expenses spent in a great amount of old-type equipments when target capacity is high.

Features of carbonization furnace:

1.Easy to operate and maintain, higher safety, energy saving

2.High carbonization rate ,no smoking, little pollution, high efficient.

3.Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process

of carbonization. 6-8 hours per stove and can work continuously .

4.The tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process

for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking.

Main paramters

Related pictures

Here are some informations about our machines, if you want to know more about them, please contact me.