Product Description

Best Most Reliable Quality in the World

Physical and chemicals Properties

Typical Properties	Data
Appearance	colorless to yellow liquid ( aqueous solution) . no pungent odor . rather stable chemically
pH	10-13
Boiling point	104 degrees C
Solubility in water	complete
Crystallization starts	2 C
Specific gravity(20C)	1.10+/-0.05
Flash point	None
Viscosity(cps)	41 (0C) 11 (30C)
Solidification	-13C
Boiling point	103C
Pourable slurry forms	-13C
Solidification	-25C
Freeze-thaw stability	good
frothing characteristics	no

Packing

Item	Packing	Quantity per 20 foot container
1	220 kg net plastic drum, 4 drums on a wooden pallet, and tightly strapped	17.6mts(80drums)
2	1100kgs net tote(IBC)	22mts(20 totes)
3	Isotank container	20mts approx.

Frothing characteristics

Mining flotation reagent -Sodium diisobutyl dithiophosphate has practically no frothing characteristics.

Selectivity

This flotation reagent is more selective against iron sulfides in alkaline circuit usually than the corresponding xanthates. It displays weak collective power to pyrite in alkaline circuit.It is generally more selective than xanthates in preventing the flotation of iron sulfidesIt is fast and compared to other thiol collectors more selective.

Collecting Power: strong

This reagent is a strong collector with reasonable selectivity high pH conditions exist.

Application

Like xanthate, this collector is generally used in the flotation of sulphide ores or sulphidized oxide minerals.Sodium diisobutyl dithiophosphateis a strong but selective collector for Cu,Ni and activated Zn minerals.Improve recoveries of precious metals, particularly those of the platinum group metalsIt is fast and compared to other thiol collectors more selective in the flotation of copper sulphides in the presence of zinc and of iron sulphides Mining collector Sodium diisobutyl dithiophosphatehas been primarily been used on copper ores where precious metals are present and at relatively high pH with lime( 10 Min) to depress the iron sulfides.flotation of copper-activated zinc sulphides from iron sulphides. Other applications are flotation of copper-activated iron sulphides, flotation of nickel-bearing mineralsflotation of antimony mineralsflotation of chalcocite for improvement in the recovery of precious metals, e.g. gold, silver, platinum.floatation of oxide copper minerals as well as sulphide copper in a sulphide-oxide ore very well in the bulk flotation of copper and cobalt minerals in conjunction with other thiol collectors usually at neutral pH. It is an effective collector for copper ,zinc sulfide ,gold ,silver ore, and, platinum ores.. Mining chemical -Sodium diisobutyl dithiophosphatecan also be used for the recovery of refractory gold if sulphides grades are too low to make autoclaving economical.Sodium diisobutyl dithiophosphate is recommended for copper ores, copper-molybdenum ores, and poly-metallic ores if pH control and depressants are used.

Dosage

The dosage of Flotation collector Sodium diisobutyl dithiophosphate is usually considerably less than for other sulphide collectors.

It varies with the type of ore, usually falling in the range of 10 to 50 grams per metric ton ore.

pH

1. Experience has shown that Flotation collector Sodium diisobutyl dithiophosphateis effective in the pH range of 4 to 12.

2. Because of its selectivity towards pyrite, Flotation collector Florrea 2214can be used at slightly lower pH than xanthates

3. An advantage of this mining reagent in comparison to xanthates is its application in acid pH ranges. Its stability is much higher, particularly in the region of pH 4.

Safety and Handling:

Florrea mining collector (Sodium diisobutyl dithiophosphate) is manufactured under carefully controlled conditions. However, to varying degrees they can be considered harmful and therefore before handling this product always carefully read and understand the MSDS for this product.This flotation collector causes irritation to eyes and skin.Safe handling includes the use of safety glasses , natural rubber gloves and protective clothing.

Storage:

+Store in a dry and well-ventilated place away from heat and sunlight after the principle “first in/first out”

+Avoid freezing

+Store in plastic drums or coated steel drums

Environmental impact

Florrea flotation collector is biodegradable. The majority of the collector is tied up with the concentrate and is destroyed in the subsequent processing operations. The remainder is transferred to the tailings . Release into the water systems should be avoided.

Packaging & Shipping

Packing

Our Factory

Our Lab

Florrea International