Infrared cooking gas burner equipment (HD220)

Chongqing Haodong Technology Factory producebbq gas grill burner, gas burner, infrared burner, gas heater, poultry heater, gas brooder, pizza oven burner, industrial oven heater, fruit dryer etc.

Now we are the first and only company who apply rare-earth catalytic combustion technology on infrared burner & heater, this kind of technology could save 10~20% energy than non-catalytic infrared heater.

MODEL	Dimension	Weight	Gas Type	Heat Output		Power
	mm	kg		BTU/h	Kcal/hr	Kw
HD220	220*170*60	0.9	NG/LPG	10000		2.94
HD400	400*80*60	0.7	NG/LPG	9030	2300	2.72
HD538	538*85*65	1.4	NG/LPG	13500	3400	3.9
HD668	668*85*65	1.7	NG/LPG	166000	4180	4.8

Why do you choose Catalytic infrared burner???

Saving 20%~30% energy than common gas burner. Friendly to environment.Long useful time: ≥11000hrCompleted thermostat controlling systemeasy installed

Infrared Burner Material:

1. Shell: aluminized steel sheet

2. Radiant part: cordierite honeycomb plates with black processed rare-earth catalyst coated

3. Nozzle: brass

4. Up cover: stamped stainless iron

Infrared Burner Main Purpose:

Barbeque grill, oven,roaster, shawarma machine,cooker and so on. It can save 30% energy when using this kind of product than using common burners.

Energy-saving, High efficiency, flameless&Smokeless!!

--Infrared cooking gas burner equipment(HD220)

The compare of ceramic plate.

Working principles of the product:

Infrared catalytic heater uses the porous cordierite honeycomb combustion plate with a special catalyst coated as a core component .

Its catalytic combustion is the best combustion mode ,which means that gas (natural gas, liquefied petroleum gas) and combustion-supporting gas (air) are mixed according to the scientific proportion through burner shell (pre-mixed room) with the precise design and manufacturing . Ignited by the ignition, the gas mixture is burning on surface of catalyst which lies in the holes of porous cordierite honeycomb plate .The vast majority(95%) of the heat generated in the form of infrared radiation penetrate the object directly,put an end to energy loss caused by heating the air to heat the object, the mode of heat convection heating , greatly improve the energy conversion ability so as to further save the energy (save 60% of the operation costs under the same industrial conditions compared to the ordinary heating mode --electric heating ).Gas is almost under complete combustion as a result of catalytic combustio. the flue gas pollution is extremely low (CO <0.02%, NOX <10ppm) ,fully meeting the national environmental standards and there is no need for direct exhaust fan.

Table 1:The use of technical parameters

Items	Technical parameters
Types	natural gas (NG),liquefied petroleum gas (LPG)
Light-off temperature	≤350
complete combustion temperature	≤380
Heat source temperature	around 850
Baking temperature range	30---850
Wavelength range	1.9m--15m
Furnance pressure natural	gas 150mmAq;liquefied petroleum gas 280mmAq

Table 2:

Comparison table for all kinds of energy consumption

Furnace type Parameters	Electronic cooker	Oil furnace	Coal-fired furnace	Infrared catalytic heaters
Energy requirement	10,000Kcal	10,000Kcal	10,000Kcal	10,000Kcal
Temperature	180	180	180	180
Energy consumption	Electricity(15 kW/h)	Electricity (1Kw/h)+ diesel (2Kg)	Coal (10Kg)	LPG(0.9Kg)
Heating time	20 minutes	40 minutes	90 minutes	5-8 minutes

APPICATION for Infrared cooking gas burner equipment

About us:

----Now Haodong Technology is the first and only manufacture in China who apply rare-earth catalytic combustion technology in infrared burner&heater.

After coated with processed black rare-earth on the ceramic surface,the energy-transfer rate goes up greating,can save more than 10% energy than non-catalytic type.At the same time, it prolongs the use life of ceramic plate.

Please contact me online, or just send me a email.