Uvioresistant Agent

Product component: special UV absorber, anion

Use field: UV absorber, UV finishing for cotton nylon fabric

Quality:

brown viscous liquid

20 °C is about 1.02g/cm3

2% solution PH value is about :5

1>>good anti-UV effect, good washing resistance

2>>Can be used alone or in combination with dye bath

3>>Excellent absorption rate and fixation rate

4>>Does not affect the touch feeling

Application:

ROCU-UV AAF Method or padding method process according to the specific fabric, recommended dosage is as follows:

Case note: ultraviolet protection factor UPF varieties by fiber denier truncation surface color and the kind of fabric specification, such as the selection of fabric must meet certain initial conditions to ensure enough to ultraviolet ray shielding effect to minimize skin through the fabric and sunlight, chooses fabric porosity should be 2%

Storage:

Product is sensitive to frost and heat, do not store in below 0 °C or above 40 °C, otherwise, it may lead to irreversible damage. Before using the product, it must be used for the product performance test. and make sure that used in sealing lid.

Note:

The above suggestion is based on our actual experience and comprehensive research, however, they are not responsible for third parties and the foreign law. Users should test it in person to confirm if products and usage are suitable for his special purpose. We are not responsible for the application method and the field that have not show by written form. Involved the marking procedures and protective measures, please refer to the relevant safety data sheets.