Feature :

1) Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.

2) The pipeline is made of red cooper and conducted by heat transfer medium liquid; the crust uses aluminum

alloy would material of high strength with airflow design.

3) Good anti-frozen performance, it can still work under the environment of -30°C

4) Match with intelligence controller and assistant electrical heater , the system can provide hot water any time

with you.

5) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation

Specification :(we can customize according to customers’ requirement)

-inner tank:SUS-2B food grade stainless steel with thickness of 1.0-2.0 mm

-outer tank:stainless steel/galvanized steel/ color steel

-capacity:80-500L

-evacuated tube: dia. 47mm*1500mm, 58mm*1800mm with heat pipe

-insulation layer thickness: 55mm

-bracket: galvanized steel with thickness of 1.5mm-1.8mm

-Heat preservation:72 hours

-hail resistance:25mm

-working pressure:0.6MPa

Split pressurized solar water heater working principle:

1. The collector absorbs solar energy and transmits it to the water tank through circulation
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically.

Certification:

Factory: