All

1600 lbs electrical electronics lock 12v 24v electromagnetic lock frameless glass door lock fail safe

Location:
Shanghai, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Electronics & Electrical > Others

Product Description

Electromagnetic Lock Description

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate used for access control door locks.

By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the access control door lock shut.

Unlike an electric strike access control door lock a magnetic lock has no interconnecting parts and is therefore not suitable for high security applications because it is possible to bypass the lock by disrupting the power supply.

The maglock with light indicator and signal output functions.Can work with networking access control system. Can work with networking access control system.The whole system includes electric lock,power suply,access controller,exit button,door bell or RFID cards.

Electromagnetic Lock Technicals

Product

Double door electromagnetic lock

Lock Dimension

500*48*28(mm)

Armature Plate Dimension

182L*46W*13H(mm)

Input Voltage

DC12V or DC24V

Holding Force

350KG(800LBS)*2

Current

12V/350mA*2 24V/180mA*2

Suitable Humidity

0-90%(non-condensing)

Lock Finish

Chrome plating

Cover Finish

Drawing oxidation

Safety Type

Fail Safe

Suitable

Wooden door, Glass door, Metal door, Sliding door.

Differences of Electromagentic Lock

High level EM lock

Middle level EM lock

Item

HLEM400series

HLEM600series

HLEM660series

HLEM1100series

MLEM400series

MLEM600series

MLEM660series

MLEM1100series

Material

Pure ironDT4C

Top grade silicon sheet

Coil

100%copper

60%copper

40%Aluminum

Finish

Top grade polished chrome

Zinc plating-blue white

Electromagnetic Lock Advantages

1.Design without Mechanical Failure

2.No residual magnetism

3.Adjustable mounting bracket

4.Life of more than five years

5.Pure iron is not easy deformation

6.The super rally adsorption force

7.Low heat

8.Lock body temperature of 20°C

9.CE certificate

Electromagnetic Lock Installation

Electromagnetic Lock Wiring Diagram

Electromagnetic Lock Soultion

Electromagnetic Lock Trouble and Shooting

Troubles

Cause

Shooting

Door cannot lock

1. Circuitry malfunction or low voltage.

2. The power supply wire is too thin and long to cause big decrease of voltage.

3. Power supply is broken to cause no voltage output.

4. The positive and negative wire of power supply is connected in reverse.

1. Check the connection, and measure the voltage to see if it is normal.

2. Modify or change the power supply wire into thicker one.

3. Check the power polarity and correct the connection.

4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly.

No transform of indicator output with low holding force.

1. The mount plate and the electromagnetic lock face not in complete close.

2. The mount plate is fixed to tight, no room to move.

3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved.

4. The surface of mount plate or electromagnetic lock is not clear.

5. The power supply with lower power.

6. The power supply wire is too thin and long.

7. The electromagnetic lock is malfunction.

1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate.

2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable.

3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely.

4. Clean the surface of lock and plate, if rusted to cause no working please change the part.

5. Use millimeter to check the voltage and current of electromagnetic lock to see if it is normal, or need repairing or changing power supply.

6. Change into high quality power supply wire, better no more the 20 meters.

7. Repair or change the electromagnetic lock.

Door cannot open

The power is not cut off

To check out the connection of power supply and controller, the electromagnetic lock is power-on locking power-off opening type. The lock can be open once power off.

Electromagnetic Lock packaging procedure

Electromagnetic Lock Certificates

Payment:

If the total amount is less than 500USD,we prefer to accept PayPal or Western Union;for big amount we accept bank transfer.

Shipment:

Normally we will use UPS,DHL,FEDEX or EMS express.It usually takes 3-7 working days depending on the countries deliver to.

We can also arrange other shipment way per your requirement and instrution ,such as sea shipment,air shipment ,etc.

Warranty:

Warranty for one year,maintenance forever,change within 3 mounths because of product quality.






This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Fancytech International Trading (Shanghai) Co., Ltd.
Phone Number:
  86-21-68391770
Fax Number:
 86-21-68392313
 
Fancytech International Trading (Shanghai) Co., Ltd.
 Shanghai , China FREE
 

Resources