New design flotation process mining machine for XF and SF from YIGONG machinery

Froth flotation/floatation machine is widely used in mineral process, such as flotation machine.

The flotation machine is mainly applies in mineral processing production, specially for lead , nickel, molybdenum and other non-ferrous metal. Hanan Yigong produce two series floatation machine: XF and SF floatation machine.

Features of New design flotation process mining machine for XF and SF from YIGONG machinery

The floatation machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a flotation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.

New design flotation process mining machine for XF and SF from YIGONG machinery Technical Specifications:

(1).XJK flotation machine

New design flotation process mining machine for XF and SF from YIGONG machinery Working principle:

1.After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.

2.When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.

3.As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.

4.Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.

5.The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the flotation machine.

...