Model: HT4100D

Bore×Stroke(mm):100*120

Cylinder No.:4.L

Displacement (L): 3.768

Compression Ratio: Biogas: 11.9:1,

Crankshaft Rotation Direction: Inverse Hour (From Flywheel)

Aspiration Type: Natural

Cooling Method: Closed Water Cooling

Rated Power (KW): 25kw

Speed Governor: Electric

Fuel: Biogas

Gas Mixer Formation: Pre-Mix

Fuel Consumption (cbm/kw.h): Biogas<065(as per your gas thermal value)

Lub Oil Capacity (L): 10

Oil Glass: 15W-40 25W-40

Oil Temperature (°C):<98

Oil Pressure (Kpa):345-483

Coolant Temperature (°C): 83~93

Start Model: Electric Start

Max-exhaust Temperature(°C):600±25

Dc Voltage(V):24

Model: HJI-20

Exciting Mode: Brushless

Rated Voltage (V):400/230

Connection Mode: 3P-4W

Power Factor: 0.8 (LAG)

Rated Current (A):36

Insulation Class: H

Protection Class: IP22

Voltage Regulation Range: ≥±6%

Voltage Steady Range: ±1.0%

Voltage Regulation Mode: AVR (Automatic)

Genset Model: HT-20GF

Rated Power (KW/KVA):20/25

Standby Power (KW/KVA):22/27.5

Rated Voltage (V):400/230

Rated Current (A):36

Rated Frequency (Hz):50

Rated Speed(r/min):1500

Approximated dimension: 1750x720x1300mm

Gross Weight (Kgs): 750

Gas Required: Gas Pressure range 0.8-30kpa.

Heat Value>5500KCAL CH4>50%, H2<5%,Tar<20mg/m3,

H2S<100ppm, Impurities<5um, No water.

The power output will be reduced if heat value going down.

Generator standard configure:

Water cooled, Auto speed governor, Steady power output with AVR,

Automatic Control digital system of 24 hours monitor provides various specifications

Supply Scope:

Gas generator set combine by Gas Engine and Brushless alternator, Steel base frame with shock

absorber, Control box with Auto controller Harsen GU641B, ECU and ignition system, Gas and Air

Mixer, Electric speed control system, Flame Arrester, Gas pressure valve, Radiator Fan, Air filter,

oil filter, Muffler, MCCB, 2*12V heavy duty batteries, Flexible exhaust connector, Tool kit, English

Language Manual books and Parks book.