HUAWEI Optix equipment 1800 China supplierSpecifications

Integrated with both OTN and WDM features, the OptiX OSN 1800 enables various services at the metropolitan network edge, such as broadband, leased line, and mobile services, to share WDM network resources for unified transmission of services on the same network. The following issues of access and transport networks can be resolved:
How to realize unified transmission of multiple services ranging from 100 Mbit/s to 10 Gbit/s
How to provide networks with long-haul transmission features and fewer transmission nodes
How to slash maintenance and operation costs
How to effectively reduce the ever-increasing equipment power consumption and electricity costs
How to realize smooth upgrade of networks and safeguard investments

Characteristics

Full service access.

All types of service access from 2M to 10G

Easy installation.

1/2 U high. Installed in a rack, outdoor cabinet, or wall- or pole-mount.

Power supply with protection.

220V AC/-48V DC power supply with 1+1 protection.

Large capacity.

System capacity expansion from 8*wave CWDM to 40*wave DWDM. 48*GE or 8*10G per dual fiber per 2U chassis. 32*GE or 4*10G per single fiber.

Ultra-long transmission distance.

Maximum transmission distance of over 140 km.

Powerful protection capability.

All boards operating at a rate of 10G or lower benefit from embedded 1+1 optical line protection.

Convenient maintenance.

No onsite management is required after installation, remote in-band management by G.709 is supported.

Specifications

OptiX OSN 1800 I (1 U)OptiX OSN 1800 II (2 U)

Appearance
Dimensions (mm)		44 (H) × 435 (W) × 220 (D)	88 (H) × 435 (W) × 220 (D)
Number of Slots		4	8
Access Capacity		60G	120G
Switching Capability	ODUk	ODUk (k = 0, 1, 2)/ODUflex
	Packet	Layer 2 switch
System Capacity		CWDM: 8-channel (max), 1471–1611 nm (Band S+C+L, ITU-T G.694.2) DWDM: 40-channel (max), 192.1–196.0 THz (Band-C, ITU-T G.694.1)
Fiber Type		ITU-T G.652/G.653/G.655
Reach		Single reach: Max. 140 km (39 dB)
Service		2M–10G full rates, including E1/T1, STM-1/4/16/64, OC-3/12/48/192, FE, GE, 10GE, FC100/200/400/800/1200, FICON, ESCON, DVB-ASI, HDTV, HD SDI, SD SDI, 3G SDI, EPON, GPON, and CPRI 2/3/6/7
WDM-Side Interface		OTU-1/OTU-2/OTU-2e/OTU5G
Any Service Board		LQM2: 8 x Any -> 2.5G ELOM: 8 x Any -> 10G LSX: 10G Any -> 10G LDX: 2 x 10G Any -> 10G
Pluggable Module		SFP/SFP+/XFP; tunable XFP
Topology		Point-to-point, chain, star, and ring
Synchronization		2 Mbit/s or 2 MHz. SSM protocol Synchronous Ethernet IEEE 1588v2
Protection		Board embedded 1+1 OCh SNCP; ODUk SNCP
Installation		19" or 23" rack, ETSI 300 mm/600 mm rack, Mobile or FTTx outdoor cabinet, Wall- or Pole-mount
Operating Temperature		–5°C to 55°C
Temperature-Hardeneda		–40°C to 65°C
Relative Humidity		5–95%
Power Supply		AC: 110–220 V DC: –48 V or –60 V 1+1 protection for power supply
Power Consumption		50 w (typical)	150 w (typical)

Restful City:Efficient Video Transmission

Challenges:

Large amount of monitoring video information needs to be transmitted and there are increasing requirements of video sharing between government offices. The OptiX OSN1800 as a WDM system applied at the access layer is a cost-effective and high-speed broadband solution that resolves the fiber resource issues.

Benefits:

1. 8 GE DWDM (ELOM board)

Service at each access site > 4 GE

2. 4 GE CWDM (LQG board, 70 km line SFP)

Service at each access site is 3 - 4 GE, and the total distance is < 70 km

3. 2 GE CWDM (LDGF board)

Service at each access site ≤ 2 GE