Mini washing machine

Location:
Ningbo, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

MINI WASHING MACHINE

[Introduction]

The single-tub washing machine is made of high-quality natural material of high intensity and tenacity that is novel and unique; The structure of humanization design and there is washboard on the inboard wall, which improves the cleaning rate effectively; The washing machine is compact and the capacity is large, it is safe and easy to operate. The scientific design makes dexterous, convenient and applicable new washing machine for you; the machine is a modern and healthy assistant of your daily life.

[Placement]

The washing machine should be put in firm and steady place.

1.The washing machine should be put on the firm and steady ground, the maximal allowable slope is 2°, otherwise it should be adjusted.

2.The distance between washing machine and wall should be greater than 5cm, in order to avoid producing noise while operating.

[Preparation before use]

1.If there is no outlet change-over switch, outlet pipe must be hung up before use.

2.Connect inlet hose.

3.Connect power to socket. The key, button and coin should be taken out from clothes.

Earthing

1.The machine uses unreconnetable three-pole plug, the terrestrial pole of power plug is link with earthing screw of the machine. Do not change the power plug by oneself.

2.Please select suitable three-pole socket which linking with earthing line to supply power. The fire line, zero line and earth line of power socket should keep the same with power line.

3.Do not dismantle the earthing screw which is used to fix yellow-green wire by oneself.

4.The power line of the machine is connected in "Y" shape, if there is anything wrong with the power line, please turn to professional service station; do not replace it by oneself.

[usage]

Washing

1.Open upper cover of washing machine, take off the drying-tub away(some types do not have this tub) put clothes into the tub evenly, put clothes into the tub evenly.

2.Add appropriate detergent according to the quantity of clothes and dirty intensity.

3.Add appropriate water that should be above clotes.

4.Close upper cover, rotate washing timer knob in clockwise way, select wash time, and start to wash.

5.Finish washing, put down outlet pipe to drain off water.

6.put drying-tub into washing machine and stick fast, rotate drying timer knob in clockwise way, select dry time and start to dry(some types do not have this function)

Rinsing

1.Add water again after dirty water is drained off from the tub.

2.Rotate timer in clockwise way, rinsing for 2-3minutes.

3.Repeatedly rinsing for 1-2times.

[Removal of faults]

FaultReasonRemoval method
Can not wash

Power cut or the plug has not been

inserted well;"washing timer" knob is

put at "0"; the fuse is melt; wave wheel is locked.

Check power and insert power plug;

select "washing timer"; replace fuse; clean sundries.

Wash feebly

The clothes exceed washing capacity;

voltage is too low; belt is too loose.

Reduce clothes; check power voltage;

adjust or replace belt.

Can not drain off water

outlet pipe is twisted; the support of

outlet pipe is too high; outlet pipe is

blocked.

Put outlet pipe straight; put outlet pipedown; clean sundries.

Unusual sound, shaking

There are some sundries between wave

wheel and washing tub; washing machine is placed unsteadily.

Clean sundries; put washing machine

steadily.

[Important Note]

1.Reliable ground before use.

2.There are vents at the bottom, the use of foreign body when not blocked.

3.Down the drain before use.

4.Down wear absorbent such as a large quantity of clothing bihs prohibited add dehydration dehydrafion.

5.This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision of instruction concerning use of the appliance by a person responsible for their safety.

6.Children should be supervised to ensure that they do not play with the appliance.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Ningbo Hanlang Motor Co., Ltd.
Phone Number:
  457-0574-63607558
Fax Number: