Lastest Panel !!! Australia MEPS Front Loading wash machine

Mainly Sale Point:

Top Frame Subassembly :
Mainly including top frame, PCB, water inlet valve, water level sensor , safety switch.

1. Top Frame :
Top frame or worktable provides a frame to fix electrical parts: PCB , water inlet valve ,water level sensor and safety switch . It varies according to different designs.

2. PCB (printed circuit board)
The PCB controls the components of water inlet valve / pump / motor /retractor ,and so on . Users can select different washing mode and programs by pressing the button.

3.Water Inlet Valve
There are two kinds of Inlet valve: single water inlet valve and double water inlet valve .it is installed to the rear of top frame, the action of water inlet valve controlled by the order of PCB.

4. Water Level Sensor
The water level sensor located at the top frame ,consists of a sensor and a pressure hose. It can detect the pressure of water and transfer the information to PCB

5. Safety Switch
The safety switch can cut off the motor power when the cover is lifted during spinning, another function of the safety switch is to prevent the tub from destroying the cabinet, when the clothes in the tub is out of balance.

6. Top Cover
Top cover is one of the main appearance parts of washing machine .there are three types of top cover :transparent cover , non-transparent cover and cover with transparent window (half transparent )