Telecommunication Equipment

Operation Video:

http://www.youtube.com/watch?v=yCiNAcVteo8

http://www.youtube.com/watch?v=EmUgU2Vaquc

SplicingThermal StripperFiber Optic CleaverTube HeaterGeneral CharacteristicsDimensions & Weight

Alignment	Fixed V-Groove (Clad to Clad)
Applicable Fibers	SM, MM, DS, NZDS
Cladding Diameter	125 µm
Coating Diameter	250 µm – 900 µm
Fiber Cleave Length	26 – 40 mm
Typical Average Splice Loss	SM: 0.03 dB, MM: 0.02 dB, DS: 0.06 dB, NZDS: 0.06 dB
Splicing and heating time (typical)	7 sec - fusion splicing, 20 sec for sleeves heating (fiber 0.9 mm), 70 sec (fiber 3.0 mm)
Protection Sleeves	30 mm (for fiber0.9 mm), 40 mm (in-plant cable 2.0, 3.0 mm)
Internal Memory	up to 2000 results
Fiber Parameters	fiber diameter 125 µm, coating diameter 250 µm and 900 µm
Fiber Cleave Length	up to 28 mm
Heating Time	1 – 15 sec
Heating temperature range	from +60 to +150°C
Stripping Effort	4 kgs
Fiber parameters	fiber diameter 125 µm, coating diameter 250 µm and 900 µm
Cleave Length	7.5 mm
Blade lifetime	48 000
Applicable Cable Diameter	for fiber: 250 µm and 900 µm, for in-plant cable: 2.0 mm – 3.0 mm
Sleeves Length	32 mm (standard)
Heating Time	20 – 35 sec
Heating temperature range	from +130 to +200°C
Tension test	1.96 N
Operation Conditions	from –10 to +50°C, at RH up to 95%
Storage Conditions	from –40 to +80°C, at RH up to 95%
Interface	USB, RCA, ext. power
Power Supply	lithium-polymer battery / power adapter ~100-240 V
Battery	1400 mA/h, 2 pcs.
Battery splice/heat cycles	120 cycles (for 0.9 mm fiber)
W	135 mm
D	200 mm
H	82 mm
Weight	1.5 kg (with battery)

Ilsintech Swift F1 Fusion Splicer Package ContentsFusion Splicer (1 pc.)AC Adaptor (1 pc.)Battery Charger (1 pc.)Battery Pack (2 pc.)Fibre Holder (1 set)Spare Electrodes (2 pc.)Cooling Tray (1 pc.)Carrying Case (1 pc.)Manual / CD (1 pc.)