double stage coal gasifier plant Directly Competitive Factory Price with ISO Approved hot in Pakistan and south America double stage coal gasifier plant is the process of producing coal gas, a type of syngas–a mixture of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2) and water vapour (H2O)–from coal and water. Coal gas, which is a combustible gas, was traditionally used as a source of energy for municipal lighting and heat before the advent of industrial-scale production of natural gas, while the hydrogen obtained from gasification can be used for various purposes such as making ammonia, powering a hydrogen economy, or upgrading fossil fuels. double stage coal gasifier plant Process Composition of Coal Gas
CO: 23-27%
H2: 12-17%
CH4: 2-3.5%
CO2: <5%
N2: 50-54%

As shown, the composition of the syngas can vary quite significantly, depending on the coal feedstock used, and the type of gasification reactor system and its operating conditions.

» Advantages of double stage coal gasifier plant

1.This stove with full water jacket , steam production is high, the pressure is stable , favorable gasification.

a. gas stove fully occupied with surplus steam source , a total of 50-60 people can take a bath of water.
b. furnace cooling effect is good , the water jacket jacket is not deformed.

2.The furnace body liner optional 16mm boiler plate making, 12mm outer lining use ordinary steel production, and this , and compared to other manufacturers , resistance to oxidation , corrosion resistance, high temperature , increase the useful life of the furnace.

3.gas furnace is equipped with adjustable baffle divides the coal and coal cone of device used in combination , coal distribution, the thickness of the furnace section basically the same fuel , thereby improving the efficiency of coal gasification , partial flaming furnace to eliminate the phenomenon.

4.The furnace using five pentagonal pyramid grate , material selection, steel castings, the grate design is reasonable, make gasifying agent distribution, operation nowadays slag uniform distribution of the furnace material layer is relatively stable and can be in the best gas state, and reduces the carbon content of the slag.

5.Ash tray part with the worm gear , the choice of 35 # steel and 45 # steel transmission parts to enhance the tensile , compressive strength to ensure that the host smooth during normal operation and durability.

6.Isolated seal cyclone , a power outage shutdown periods, improve water seal height , cut off gas furnace and hot working gas between the furnace to ensure that generate no pressure to prevent tempering explosion incidents.

7.The Company Daipei each user using the gas furnace operator training, to ensure that users in the use of gas stoves , the enterprise itself from the environmental aspects and economic terms, it can achieve the best requirements.

8.Gas amount of air required for complete combustion close to the theoretical amount of air required, the excess air coefficient 1.05, compared with burning oil , coal less easy to adjust the flame to reduce the incomplete combustion loss of heat, because the amount of excess air reduction, reducing the amount of waste gas from the waste gas out of the heat loss will be reduced, thereby improving the thermal efficiency of the whole equipment .
With a gas furnace gas as fuel industrial kilns, relatively low cost and environmentally friendly, is the ideal fuel for industrial kilns, in our metallurgy, machinery, light industry, building materials, chemical and other industries are widely used.

»Features of double stage coal gasifier plant 1) Convenient to remove slags;
2) Easy to operate and maintain;
3) Long service life;
4) Continual and cyclical manufacturing;
5) It is safe to use for with double safe control;
6) Evenly combusting.

»Application of double stage coal gasifier plant

Coal Gas Generator which designed and manufactured by our company use air and water vapor as the gasification agent, is the advanced equipment. It can product mixedgas, fit gasify coke and other fuels. Coal gas generator is widely used in machinery, metallurgical, chemical, glass, building materials, light industry, food, textile industry.

»Technical Parameters of double stage coal gasifier plant

Model(mm)	QM0.8	QM1.0	QM1.2	QM1.5	QM1.6	QM1.8	QM2.0	QM2.4	QM2.6	QM3.0	QM3.2
Chamber diameter(m)	800	1000	1200	1500	1600	1800	2000	2400	2600	3000	3200
Hearth active surface	0.5	0.785	1.13	1.77	2.01	2.54	3.14	4.52	5.31	7.07	8.03
Suirable fuel	weak coherent gas carbon,anotherracite,burnt carbon
Fuel granularity(mm)	25-80
Fuel consumption quantitykg/h	40-100	70-140	120-190	160-350	350-460	500-600	500-720	700-1040	850-1200	1700-2000	1800-2200
Gasifying agent	Air ,steam Coal gasification is the process of producing coal gas, a type of syngas–a mixture of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2) and water vapour (H2O)–from coal and water. Coal gas, which is a combustible gas, was traditionally used as a source of energy for municipal lighting and heat before the advent of industrial-scale production of natural gas, while the hydrogen obtained from gasification can be used for various purposes such as making ammonia, powering a hydrogen economy, or upgrading fossil fuels
Gas yieldNm³/h)	140-350	245-490	420-670	560-1200	1200-1600	1500-2100	1750-2500	2500-3600	3000-4300	6000-7000	6500-7500
Gas calorific valu(Kj/Nm³	5020-5670				5020-6000
Water jacket heating area()	4.02	5.02	6.78	10.37	11.06	12.44	17.58	21.87	23.69	30.16	38.4
Steam output (kg/h)	60	80	130	200	220	260	350	420	600	840	880
Gas outlet temperature()	(400-500)Plants related with the coal					(400-500)Plants related with the coal
Gas outlet pressure(Pa)	1000					980-1470			1470-1960
Gas exportation diameter(mm)	219	325	325	426	426	529	630	720	820	1020	1050
Air pressure(Pa)	3000					4000					4000
Saturated air temperature()	50-60					50-65
Ashpan rotational speed(r/h)	0.177-1.77
Equipment gross weight(t)	3.5	4.5	5	7.5	10	20	23.4	29.8	32	37.6	43.6
Motor power (kw)	6	6	6	7	8	10	14	20	20	27	32

»Application of nature gas generator furnace, gas producer

»The customer visit and negotiation

» Our honour and quality certificate

»Warranty of gas producer, gas furnace and coal gasifier equipment

1. One to three Years (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis. We can send our engineer to provide the installation and trial run in your place. But the relevant cost shall be bear in your account (round trip air ticket, board and lodging).
2. Our professional service includes: Free training, Guidance Installation and Debugging.
3. If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.

Dear sir.

How are you doing, this is Jolly Lee from China.

We are one of the most perfessional gas producer, gas furnace and coal gasifier equipment manufacturers in China. In order to select the suitable models and design to meet your requirement, pls kindly inform us the following information:

1.How much gas do you need? how many cube meters per hour? What do you use it for?

2.What is the calorific value and size of the coal there?

3.You need pure gas or original gas just generated from the gasifier?

4.What do you use it for? By the way, do you have online contact information such as skype, googletalk?

Very appreciated for your inqury and answer.