Beauty Salon New Hot Selling CE Approved Tattoo Removal Lasers

Product Show

1. Product Pictures of ce approved tattoo removal lasers

The energy of Q-Switched ND: YAG Laser can be absorbed by the blue and black melanin.

The melanin will be fragmented so small that they can be metabolized by the lymphatic system or be egested out of the body. Thus the tattoo or other pigmentations will be removed without injury to normal tissue. The treatment is safe and convenient without downtime or side effects.

2.Technological Advantages of ce approved tattoo removal lasers

1st With the 5 times continuous each second’s amount to 10000 light points to produce when the indoor temperature reach to 30 degrees,it has obvious advantage comparing with other similar products.

2nd With the multi-language interface (6 languages), which has been favour with overseas and domestic customers

3rd Equiped with infrared detector, which has convenient to operate with tyro.

4th Equiped with the less than 10% light transmission rate of the Q-crystal stick, which has purity of wavelength about 1064nm and width about 8nm only, it has significant therapeutic effect comparing with other similar products.

5th The portable chassis design, equipped with artificial mechanical handle, more suitable for beauticians carried out operating.

3.Application of ce approved tattoo removal lasers

Endogenous melanin: nevus of ota(birthmark), dermis spot , age pigment ,freckle etc.Exogenous melanin: large area tattoo, embroider eyebrow,Eyeliner Tattoo ,traumaticpigmentation etc ;(Except lawngreen and wheat color)

4.FAQ for ce approved tattoo removal lasers

Q:Is the Laser harmless if I see it direct?

A. We have equipt the care-protective glasses for the users

Q:What is the lamp life?

A. This machine has a counter shows you the total number .Averagely,Lamp life is 300,000 shots,the lamp

can emit for more than 1,000,000 shots ,but after 300,000 shots ,you will find the intensity of light will

become weaker, removal tattoo need more times.

Q:This machine can do vascular therapy?

A. We are not suggest you use this machine to treatment vascular,as the blood containing hemoglobin,and

in the treatment process the hemoglobin absorpt the 532nm wavelength of light,if it is not spread in

time, it will form purpura.

Q: If we need to replace the water after finished the treatment every time?

A. It is no need to replace every time,unless the machine is overheated,but we need to operate it in a

short time ,we can choose to replace the half of hot water in the machine to cold water .
The water inside of the machine is not consumed,it plays the role of cycle cooling. Users to replace the

water every 30 days to 45 days interval .

Q:Treatment head cleaning

A. Clean the two treatment head softly using cotton bud in case the filter glasses is contaminated by dust

or ashes.

Q:It remove all color tattoo?

The laser is with 1064nm & 532nm treatment heads. The 1064nm remove black, brown, cyan color pigment

and the 532nm removes red, bule, coffee, yellow and other color pigment.

Q:How many times needed to remove all tattoo?

It depends. Some tattoo is thin and easy to remove, some are not. It depends on the tattoo and its color.

Usually it takes about 4-6 times

Q:How to maintain machine?

1. Change water each 15 days. If it is busy season, change water more frequently.

2. Make laser have a rest after each treatment for about 10-15 minutes. Remember: A small rest is friendly to your laser.

3. Stop doing treatment if the treatment gun becomes hot after a long time working.

4. Distill or pure water only dirt from water should stem the water pipe and make water cooling not working good.

5. Clean the handle piece after treatment (to keep good function & good result)

6. Please turn it off when treatment is finish. It is a machine but it needs rest.

7. Be careful! It is your laser, please do not drop it down, it would get hurt .

5.Accessory of ce approved tattoo removal lasers

6. Option Function(Carbon black doll)

7.Technical parameters of ce approved tattoo removal lasers

Laser type	Sapphire Q-Switch / YAG Laser
Wave length	wavelength 1064nm & 532nm
Width of pulse	10~20ns
Pulse energy	200-1200mj
Voltage	220V / 110V / 12A 50Hz(60Hz)
Cooling system	Wind + water

8.More Products

Company Show

1. About us

Guangzhou Baiyun District Fuqiang Beauty Equipment Factory is located in 4/F, Building A, Xiamao Yishe Industrial Park, Baiyun District Park, Guangzhou, China, and is specialized in manufacturing most kinds of beauty machines. With an experienced and professional team, we have exported our products to many countries and regions all over the world, especially the USA, Spain, the Middle East, etc. Our products enjoy a good reputation among our customers.
We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

2. License and Certificate

3.Contact