street professional lighting

JYdL-108080
Name	Specification	Quantity	Parameter
Solar panel	140W/12V	2 piece	Polycrystalline, 156x156mm, 36piece. Size:1490x670x35 with 90cm wires,MC4 Connector. and Weight:12KG Warranty: More than 90% output power in 10 years .and more than 80% output power in 25 years. The product have passed TUV, IEC, MCS etc certificate.
Light source	LED80W/24V	1 piece	Double Integrated Power LED(80W),Woking Voltage DC24V,General luminous:8000lm,LED Luminous Efficiency:100lm/W,Center illuminance:20lx,Ra>80,Color temperature:2700-7000,Protection Grade :IP65,Working life >50000, It can woke more than 10 years in accordance with 12 hours a day. Lamp shade is Die-casting molded with aluminum alloy,and its face is UV-resistant and corrosion resistant . No bad glare; No Strobe; Start without delay .Low maintenance cost .
Controller	20A	1 piece	PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control,Protection Grade IP68
Battery	12V/150AH	2 piece	Gel Battery that dedicated to solar energy. It can use recurrent more than 400 times in 100% discharge cases For the solar energy street lamp that in simple circulatory system. And its advantage is that :the small self -discharge rate ,the better deep discharge, Top charge acceptance, large capacity,strong start in low ,the good shock resistant and Anti-temperature charge Production The two Battery is used in series in this collocation
Pole and other steel fitting	10M	Set	Best steel Q235 or Q345;hot dip galvanized and paint coated . iron plate is rolled into type for one time . Flange plate :400x400x20mm Solar panel bracket and 4# or 5# Angle iron,50x5mm and 100x100mm Flat iron. Square tube is assembled by bolt ,any section is made with mold. With high efficiency and precision , standardized parts can replace each other and the same time increase the packing quantity and reduce transport cost . Battery body are welded after 2mm plate stamping molding Lamp arm 60x3mm Welded tube and iron plate welding
Wires harness	--	1 piece	With the special connector ,standardization,substitutability ,high installing efficiency,saving cost . Wire harness can be designed according to different lamp type .
others	Baseplate 20 steel rod ,standard component and so on
Conditions	Voltage of system: 24V,working time: 10 hours ,Best work temperature -20degree-50degree
Packing Quantity	70set/40HQ

Description of design

1. This system configuration is suitable for area that peak sunshine for five hours, three continuous rainy days. System configuration can be designed according to customer's specific project requirements and climate conditions.

2. The energy of Solar street lighting is form solar radiation, Whether the sunlight that exposure to solar panels is abundant or not directly affect lamp lighting effects, so solar panels can exposure to sunlight at any period of time , so when Select where to install the lamp, you should avoid tall buildings or other objects that can block the panels.

3. In order to ensure its beautiful characteristic and its ability that receive better solar radiation, we suggest that you should clean the dust on the solar panels every half of one year , but don't rinse area from the bottom up.

4. Battery is placed on the top of the pole, and it’s good for battery heat-dissipation, shortening the length of the cable, reducing pressure drop, easy installation & anti-theft.

Application rangeThe road, City Road, Pedestrian Lane, Squares, Schools, Parks, Gardens, Residential areas, lant and other places of outdoor lighting.

1. LED Description

LED lamp shade is a transparent shade and made of polycarbonate plastic injection molding material, high strength, good light ; using LED as the light source, and LED is light emitting diodes, has the characteristics of high efficiency and long life.At present, the lamp is shaping up as a mainstream lighting products of new generation.

Use intellectual property rights to encapsulate the single integrated high power (80 w) LED light source, applying the unique light source design of multiple single chip integrated single-mode , and choose imported high brightness chip;

1. Have a initiate integration design for radiator and lamp body , LED is direct connected to shell tightly , heat is dissipated by convection from the outside faces of the radiator to the surrounding air.guaranteed the LED street light the lifespan of 50000 hours fully . If working 12 hours a day, its lifespan is more than 10 years, of course have a low maintenance cost.

2. Lamp shade is die-casted to model with aluminum alloy ,and it can play a role in heat dissipation waterproof, dustproof. Have a treatment that UV-resistant and corrosion resistance for lighting surface and the overall lighting up to the IP65 standard.

3. A monomer ellipse aluminum reflective cavity with solitary ball surface design,LED light is controlled in the range of needs, improves the uniformity of lamps glowing effect and light energy utilization, but also highlight the advantages of energy - saving LED lamps.Compared to traditional sodium lamp, you can save more than 70 %;

4. Non-badness glare,non-stroboscopic . Eliminate the dazzling ,visual fatigue and interference of sight line that caused by the badness glare of the common street light. Improve the safety of driving;

5. Low working voltage, advantage: Not like ordinary street lamp that because of the high-pressure adsorption dust, result in the chimney becoming black. safe and reliable;

6. Low operating temperature, LED light source belong to cold light source, good heat dissipation, the operating temperature <60degree,Don't cause aging yellow lampshade;

7. Start without delay, Electricity is to reach normal brightness, Pass on electricity immediately reach normal brightness, no need waiting, Eliminates the traditional street lamp for a long period of time the boot process;

8. Impact resistance, be able to bear shock, No filament and glass shell, No traditional lighting splintery problem;

9. High color rendering index, good color rendering. The color is more real, more colorful;

10. Variety of color temperature for chose, Can meet the requirements of different occasions for color temperature;

11. Wide input voltage, Constant current technique, high efficiency, low quantity of heat, High precision of constant current;

12. For electricity grid is pollution-free. Power factor≥0.9. harmonic distortion≤20%;

13. Intelligent control, constant current, the power could be intelligence adjusted according to the needed. Using single chip microcomputer combined with the traditional power supply converter, can realize intelligent control of high power LED light source: light-operated + time control + power automatic adjustment;

14. The thin of the appearance, can effectively reduce wind resistance, reducing load of the light pole, enhanced safety coefficient;

15. Environment-friendly; no lead,no mercury etc pollution element, there is no pollution to the environment.

2. Battery Description

Gel battery is able to bear overfull charge or overfull discharge, able to bear shaking,shock resistance, Long storage life. High quality alloy plate grid and unique electrolyte formula, Delicate and perfect processing and manufacturing technology, Make the battery has a large capacity,good deep discharge performance,charge acceptance ability,low temperature starting ability,low self-discharge rate,Good performance of resistance to temperature change,,long life characteristics and so on. Security seal structure, no need add acid or water to maintenance it, Does not leak acid, No acid mist, Environmental pollution free.

Storage battery is gel deep cycle discharge type, apply to frequent load changes, harsh environment temperature conditions. inside a specially designed grid to ensure the reliability of the depth of discharge cycle, under this 100% discharge circumstance, could recycle use it 400 times. Used for solar street lamps and other light cycle system, could guarantee the cycle life of more than 2000 times.

3. Controller Description

CIS controller is special designed for solar street light, provide perfect, multiple protection for solar street lamps’ electrical systems, and through good control strategy, effective extend the system’s power supply time.
*protection grade: IP68, effective dust-proof and water-proof
*sturdy and durable aluminium alloy case, anti-corrosion
*four stages charge control(main charge,powerful charge,equalizing charge,float charge)
*Single and double street light output contro l flexible
*infrared remote controller (CU) set, simplicity and convenience operator
*LED status indicate
*at night all the time,morning and twilight double time light-operated/time control timing function
*external temperature sensor, automatic temperature compensation
*output power regulatory function, saving energy and protecting environment.

*compact structure, small volume, easy to install

4. Solar panel Description

1. We could ensure the conversion efficiency of solar panel with high efficiency polycrystalline cells and high transmittance tempering glass, this not only reduce solar power supply system installation cost ,but also increase unit system area electric-power output .

2. Solar power float ±3% , it could ensure our customer get the power from solar panel, reduce the power loss caused from mismatching power, improve system output function and bring more benefit for customer .

3. Obtained TUV and so on, we keep authentication high consistent with standard testing in actual production.4. 5 years’ warranty, no less than 90% of standard output power is within 10 years, 80% of standard output power is within 25 years.

5. Model of solar street light

6. CERTIFICATE

7. Loading Picuture

8. Part of solar street light project Picuture