All

solar plug play Energy Storage System solar plug play

Location:
shenzhenChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Energy

Product Description

solar plug play Energy Storage System solar plug playCATL Home Energy Storage System, use the Fe Battery that has high-energy density, high reliability and well safety performance, realized the integration of photovoltaic inverter, combining the advanced power electronics from all over the world.

It is a featured and excellent performance product that high efficiency, high reliabilityand high intelligence.

Appearance

Block Diagram

Indoor Controller

Working Mode


1,Sunny&normal electricity

First the PV panels for the interior specific line-powered electricity generation, excess energy is stored in the ESS.

The mains in standby power mode.

2,Sunny&mains power

If PV panels generate electricity to meet demand, then by the ESS on the indoor power:

When the ESS SoC ≤ 20%, the alarm (1 Ci / 2sec),

when the SoC ≤ 10%, the alarm 1 / 1sec, and cut off the indoor supply.

3,Lack sunlight&normal electricity

The ESS SoC> 50% ,ESS separately to the indoor power;

if SoC <50%, switch to the mains supply, ESS charging.

In such cases, photovoltaic panels do not work.

4,Sunshine complement mains power

Separate from the ESS to the indoor power line,

when the ESS SoC ≤ 20%, the alarm (1 / 2sec),

when the SoC ≤ 10%, the alarm 1 / 1sec, and cut off the power supply of the indoor.

5,Nightfall

Separate from the ESS to the indoor power line,

when the ESS SoC ≤ 20%, the alarm (1 / 2sec),

when the SoC ≤ 10%, the alarm 1 / 1sec, and cut off the power supply of the indoor.

6,Midnight

Mains supply line for the interior, as well as ESS charged to SoC ≥ 50%.

Technical Parameters

Function

Project

Model

48V 3300Wh

48V 6600Wh

PV

Specification

1000W

Voltage range

DC36V-72V

Show

Panel indicates

LCD

input(AC)

Input voltage range

220V±10%

Input frequency range

50/60Hz±5%(choose)

Short circuit protection

Open space to fuse

Input protection

Overcurrent protection

Maximum input current

20 A

System Output

Output Power

1500W

3000W

Rated Current

15 A

30A

Switching time

0ms

Output Voltage

100V/220V AC(choose)

Output Waveform

Sine

Output frequency

50/60Hz±5%(choose)

Inverter sine waveform distortion

< 5 %

Phase

Single-phase 2-wire

Overload protection

Circuit breakers and fuses

Battery

Battery

Batteries Specifications

66Ah Lithium iron phosphate battery

Composition form

16S1P

16S2P

Battery capacity

48V 3300Wh

48V 6600Wh

Cycle life

2000

Charging current

20A

Charging cut-off voltage

57.6V

Discharge cut-off voltage

44.8V

Continuous discharge current

1C

Discharge power

≥2000W

≥4000W

Battery Protection

Overcharge protection

Over-discharge protection

Over-current protection

Over temperature protection

Battery Monitoring

Monitors the battery voltage and temperature

Cell balancing

Active equalization

Alarm

Battery over / under voltage, over temperature, connection failure, continuous overload, discharge fault, etc.

Appearance and other

Dimensions

480*240*638(mm)

Weight

≤70Kg

Visual indication

LED

Altitude

≤4000m

Common Faults and Solutions

NO.

Symptom

Possible Causes

Remedy

1

Power indicator does not light

1,Enter photovoltaic panels poor contact with one machine

2,Photovoltaic panels welded wire off

3,Photovoltaic panels internal fault

1,Disconnect the wiring Reseat

2,Re-welding wires will come off

3,Replace PV panels

2

Cannot charge

1,Charging circuit exists off-line, virtual access

2,Storage batteries internal resistance faults

1,Detection circuit, connected to wires

2,Replace the failed storage batteries

3

No Output

1,Output Plug, seat bad

2,The internal temperature is too high

1,Unplug then plug the new patch

2,Improved ventilation to cool before use

4

Circuit breaker trips

1,The output of the connected load short-circuit

2,The output of the connected load is too large

1,Excluding short-circuit fault point

2,Disconnect the larger the load, limiting the load power

5

Lack of insufficient power supply energy storage(Such as continuous rainy days)

Charging time under sunlight



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shenzhen UZ Electronics Limited
Phone Number:
  86-0755-83128521
Fax Number:
 86-0755-83109966
 
Shenzhen UZ Electronics Limited
 Guangdong , China FREE
 

Resources