4E1 to EHT fiber optical converter

Our product 4E1 to Ethernet converter IDM TRX-4E1 is a protocol converter use inverse multiplexing techonology. IDM TRX-4E1net can make many channel E1 transfer 10M/100M ethernet. it can make 4E1 channel and ethernet interface interconversion. The max ethernet bandwidth is 7.92M. IDM TRX-4E1net is used in Lan-To-Lan, Bureau of the interconnect , VOD, remote control, Switches of E1 interface card etc. it expand the transmission distance and applied range with the maby E1 resource in telecommunication network.

Feature

Standard 19 inch 1U housing strncture, easy install.4 ethernet and 4 E1 inverse multiplexing, Support TAG VLAN settingSupport E1 channel delay detection fuction, The max relative delay in E1 channel is 220msCan transfer jumbo frame, support ehternet switchboard with Vlan faction.Can delete the faulted E1 channel automatic. it can automatic recover when the faulted is deletedSupport RS232 interface and SNMP webmasterSupport GFP-F, meet ITU-T G.7041 standard.Support 2M line loopback functionCan transparent transmissionJumbo Frame that meet IEEE 802.1Q, support Ethernet converter with VLAN function.

Specification:

E1 interface

Code pattern	HBD3	Code rate	2048Kbps±50ppm
Impedance	70Ω / 120Ω	frame structure	PCM31/30
JITTER standard	ITU-T G.823	Standard Protocol	ITU-T G.703/G.704
pattern	Can set Frome or not frome, Time slot can match

Ethernet interface

interface type	RJ45	Rate	10M/100M
Standard Protocol	IEEE802.3	Working mode	Full/Half duplex

Power supply

Power supply

AC220V/DC-48V

power consumption

≤5W

Environmental conditions

Work Temperature	15ºC~65ºC	storage temperature	-25ºC~75ºC
Humidity	0- 95% (non-congelation state)

Product model:

Type	describe
IDM 1E1 network bridge	Achieve 4 Ethernet data to 1E1 inverse multiplexing
IDM 4E1 network bridge	Achieve 4 Ethernet data to 4E1 inverse multiplexing
IDM 8E1 network bridge	Achieve 4 Ethernet data to 8E1 inverse multiplexing

Application:

Certified: