Minerals And Metallurgy Machine

1. Description of Minerals And Metallurgy Machine

Minerals And Metallurgy Machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig mainly consists of three parts: main frame, driving set and jigging chamber.

2. Application of Minerals And Metallurgy Machine

Minerals And Metallurgy Machine is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.

3. Features of Minerals And Metallurgy Machine

l High capacity

2 High concentration ratio and high recovery

3 Fabricated with highest quality material

4 Easy to install, operate and maintain

5 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling

6 Saving water 30-40% than ordinary jig

7 The pulsation speed very easy adjusted by regulator

8 Suitable for roughing and desliming

9 Can achieve a good result

4. Structure of Minerals And Metallurgy Machine

Minerals And Metallurgy Machine chamber sectional drawing:

5. Types of Minerals And Metallurgy Machine

The saw-tooth wave jig as Tungsten Jigs is divided into left-style and right-style according to the installation location of feed pipe flange. Standing on the ore feeding to look at the ore discharge, feed pipe flange on the left is left type, on the right is the right type.

6. Technical specification of Minerals And Metallurgy Machine

Minerals And Metallurgy Machine we produced:

Minerals And Metallurgy Machine applications:

Other series from Jinshibao Mining Company

This is 5LL-1200 spiral separator which is usually used to primarily recover most of the useful minerals before the concentration. It is simple structure, little foot-print, without power, low cost, and high recovery.

This is LY2100 shaking table. The shaking table can be used for roughing concentration, scavenging, and cleaning. So it is always the necessary equipment in the ore mining. As its capacity is small, and covers large area, it is usually used for cleaning. After the concentration of centrifugal concentrator, spiral separator, or jig separator, we usually apply the shaking table for cleaning to get the final concentrates.

This is trommel screen. It is usually used at the primary period of placer gold mining for screening and washing the gold ore.

Other grinding equipment from Jiangxi Jinshibao Company

QHQM series ball mill for laboratory

XMQQ-460*600 lab ball mill

hammer mill

Industry ball mill

Trade terms of Minerals And Metallurgy Machine

Weclome to visiting our factory to check the Minerals And Metallurgy Machine Or send to my email as follow information.

1.Capacity of project?

2.Particle size of original ore?

3.What kind of mineral ores ?

4.Destination port ,would like to send you CIF price.

5.Kindly let me know the electric power of your country , here we are 380V 50HZ 3PHASE

Will suggest you the best type and good machines for respect customers.

Why choose our company machine?

1. We are factory (NOT Dealer)

All machinery from Jiangxi Jinshibao Mining Machinery Manufactory are made by ourselves, No trade company make

Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).

So please buy from factory.

2. We will do our best to satisfy every customer's needs

Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.

3. Training & service

Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

4. If you are new for this business, I will help you

Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on

5. We will recommend a suitable type for you and send you a best quotation

Welcome to visiting our factory to check Minerals And Metallurgy Machine ,our website:www.shakingtable.com.cn. Send us the enquiry at any time, will reply to you soonest.