-	Very versatile process equipment.
-	Fully automatic operation based on PLC control.
-	Minimum handling and more hygienic.
-	Top Mounted telescopic cylinder for auto bag shaking.
-	Clamp type bottom mesh for container.
-	Capacity available from 2.5 kgs. To 500 kgs.
-	MOC SS 304 / 316 / 316L.
-	cGMP with documentation.

SAILENT FEATURES:

Better productivity and lesser drying time.Single piece Design & construction to enhance GMP and to facilitate hygienic cleaning.Pre air filtration by 20 or 10 Micron filters.Secondary air filtration by 5 Micron filters.Final air filtration by HEPA (0.3 Micron) filters (optional).Solid flow Monitor to detect leak on Filter bags to avoid Material loss as optional.Sampling port is provided to take out sample of material during process without interrupting process cycle.Fully sealed pneumatically controlled damper with o to 100% positioning for accurate air monitoring and control or AC VFD can be provided (optional).Special care is taken to avoid sharp corners or services eliminating the chances of product contaminator.Quick releasing clamp & plate is provided for dismantling of bottom screen & ease of cleaning during product change over.

OPERATIONS:

A Batch of product loaded into the material bowl is seated in the chamber & heated filtered air is drawn through the product. By this, the entire surface of individual particle is surrounded by the hot air thus achieving a homogeneous distribution of temperature and as a result of this, a rapid and careful drying down to the smallest- residual moisture. Escape of material from the granulation chamber is prevented by exhaust filters, which are periodically agitated or purged to reintroduce the collected material into the fluidized bed. The product can be cooled and the material container exchanged for the next batch. The quantity of air is regulated by means of outlet air damper only.