OFS-FTH-JS5

1. product introduction

OFS-FTH-JS5 type cable connector box of cap type series of a. In the optical fiber transmission process, the products are through connection and differences in the function, and the male mention cable joint connection protection; Suitable for all kinds of different diameter of cable through and differences in; Can be used in overhead, hold pole, wall and buried installation; Product good seal performance, installation simple operation, wide range, it is the best choice of the optical fiber connection.

2. Product description

IP protection level can reach IP68;

Can be installed 1 x "PLC shunt and 2 x for PLC shunt;

With four small round into the cable hole and a large oval into line hole;

Joint box shell by vulcanized rubber for seal;

Cable in and out of holes are hot shrinkage seal

3. Characteristics

• can be convenient to increase or decrease the size according to the capacity of the melt flange

quantity

• three Settings prevent cable is external pulled off

• molten flange space is big, easy to maintain and storage of optical fiber

Can, in °C to + 65 °C temperature range to use

Easy to repeat, open, no tools are required, waterproof, prevent gas leakage, flame retardant

• set vertical and horizontal design characteristics

• SGS ROHS testing the authentication

• suitable for aerial, buried, pipe use

4.Product parameters

5. Main components

Optional accessories: valve,earthing device,optical splitter,adapter,pigtail,wire jumper

Accessories: specification,Cable protection heat shrinkable tube,fiber heat shrinkable,Buffer

tube,earthing wire,nylon tie,sand paper,Differences card,labeling paper,

desiccant,Tin foil,insulating tape