SHUNAN - Specialize in Producing A Variety of Building Adhesive

Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24hours.

Packaging

· Weight: 25kg

· Standard: JG/T547 - 2005

· Shelf life: 6 months from production date

· Storage: unopened bag on plate in dry place

Field of Application

· Used to fix tiles with any water absorption

· Tiles fixed on external wall suggested size is less than 120cm2

· Tiles fixed on wall suggested weight is less than 20kg/cm2

· Fix tiles on internal or external walls and floors

Amount required

Typically one 25 kg bag will cover 4 - 5 square meters (5 ~6 kg/m2)

Technical Information

Substrate Preparation

1) Substrate should be flat ,hard, level, dry, and clean with normal absorption

2) Clean the surface until free of grease, dust or any stains

3) Old paint or plaster should be removed

4) Substrate been repaired should be preserved at least 48 hours

Application Enviroment

1) Ambient temperature: 5°C~35°C

2) Avoid application if too hot or freezing weather

3) Avoid application under direct sunlight and strong wind

Safety

1) May be sensitive to skin in case of contact.

2) Keep out of the reach of children

3) Avoid breathing the dust

4) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

5) Wear suitable protective clothing,gloves and eye/face protection