H02 Vehicle GPS Tracker Car GPS Tracker free software gps/gsm/gprs sim card tracker

How it works?

After you connect the tracker with your car correctly,you just need simply insert a GSM sim card into the GPS unit and set the parameters according to the instructions. Whenever you send a text message to the unit it will respond with coordinates of where it is located. You can use these coordinates on any mapping software (for example google earth) which will show where exactly your object is. You can also use GPRS link your computer to real-time location tracking! Our tracking platform is www.gps112.net and www.gps588.com

Terminal Operations

Start-up/Shut-down

Start-up: insert the SIM card, turn on back-up power supply, the terminal will start up;

Shut-down: disconnect power plug, take out the SIM card, the terminal will shut down;

Terminal parameters settings

All beginning letters in each parameters’ commands shall use upper-case letters, all punctuations shall be English punctuation, only part of commands will reply.

By sending enquiry commands to the terminal, corresponding contents will be replied.

Commands shall be sent by the bound cellphone number.

Cellphone SIM Card Number Binding

After the terminal start up normally, please bind your cellphone number first, alarms will send to this bound number.

Send SMS: *ZC#terminal password# Cellphone SIM card number#Terminal SIM card number#

Initial password is 000000, command start with *

e.g.: *ZC#000000#15888185569#12345678922#

Password Modification

Send SMS: *MP#Previous terminal password#new terminal password#(6 numbers)

e.g.: *MP#000000#987654#

Initial password is 000000, new password is 987654

Get Terminal Position by SMS

Send SMS: DW to terminal, it will reply the terminal current geography location

e.g.: south east 30 meters, ABC company, Meilong Rd, Shenzhen, Guangdong Province,China.

Google Address Link

Send SMS: GOOGLE to terminal, it will reply the terminal current geography location link http://maps.google.com/maps/?f=q&hl=en&&q=31.237395,121.390373333333;S=0;D=2012-5-2312:00:00;D=0

Please note: the default time is Greenwich time, actual time needs to add your time zone number

e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8 hours)

Vibration Alarm

Send SMS: SF to turn on the vibration alarm

Send SMS: CF to turn off the vibration alarm

No spaces.

Engine Control (Optional)

When the vehicle was stolen, the administrator can send Cut-off Engine command via the live tracking monitoring system, Under the conditions of safe driving, the command will trigger the relay to cut off power of oil pump to stop the engine, and it can’t be re-start the engine without restore engine command.

To secure the safety of vehicle, the terminal shall in valid GPS signal status, also speed under 20km/h or still status to cut off engine.

After the theft alarm dismissed, send restore engine command via live tracking monitoring system will trigger relay to restore the power of oil pump, the vehicle will able to start up.

Cut off oil pump power

Send SMS: DYpassword to terminal, and reply: Config ok

Restore Oil pump power

Send SMS: TYpassword to terminal, and reply: Config ok

Intial password is 000000

e.g.: DY000000,TY000000

SOS Alarm(Optional)

Any emergency case happens, press the SOS button for 3 seconds, trigger the SOS emergency help alarm, the terminal will call the bound cellphone number repeatedly, in nobody answers case, it will ring max 3 times, at meantime, the terminal will upload SOS alarm information to live tracking monitoring system.

Main Power Cut-Off Alarm(Optional)

After the terminal main power been cut, it will automatically trigger power cut off alarm, it will send a main power cut off alarm SMS to bound cellphone, and meanwhile upload the alarm information to live tracking monitoring system.

SMS e.g.: Alarm main power failure, Please pay attention!

Voice Monitoring(Optional)

Send SMS: JTto the terminal

The terminal will call back and the administrator will able to monitor the voices.

Live Tracking Monitoring Platform

Web Address:http://www.gps588.com

If you already have a login account and password information, you can login our platform directly, or please contact your distributor and ask them to open you an account and provide you the password.

Input the address link in your computer browser, input the account and password, then login to your service platform.

About the use method of platform, please ask your distributor for Service Platform User Manual.

App on Mobile phone