indian rock stone crushing sand making machine

Location:
shanghaiChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Shanghai Joyal Mining Machinery Co., Ltd. sand making machine include vsi sand making machine and pcl sand making machine.

Introduction of Joyal vsi sand making machine

The JOYAL VSI Crusher is improved on the basis of Germany high technology, which is highly-efficient and superior in performance. The JOYAL VSI Crusher (sand making machine) is widely used to produce sand and stone for highway, high-speed railway, city project, hydropower dam constructions, and concrete mixing plant, and it’s also widely used in sand making and stone reshaping industry.

Features

1. the oil needed is supplied by two oil pumps, and the machine stops automatically if there is no oil; the motor can be heated automatically in winter to ensure the normal working of the machine.
2. Hydraulic lifting system to check and replace the spare parts, thus it’s very easy and simple to maintain.
3. the bearing is of SKF and TIMKEN brand to ensure the normal working of the machine.
4. unique vibrating alarm device: if the machine works abnormally, the alarm will sound to stop the machine, thus protecting the whole machine.
5. Special feeding structure; rock on rock, and rock on iron to make the stones crushed and reshaped.
6. Unique dustproof seal system to prevent the dust getting into the spare parts.
7. unique design of material bumping angle reduces the friction between raw material and spare parts, extending the working life of spare parts and cut the cost.

Working Principle

1. Central feeding:Raw materials fall down into the feeding hopper, then enters the impellor through central entrance inlet, thus the material being accelerated by the high-speed impellor and being thrown out at the speed of 60-75m/s. It is crushed when hitting the impact plate, and the end products comes out from the discharging outlet.
2. Ring feeding:Raw materials fall down into the feeding hopper, and the materials are divided into two parts by a special plate. Some materials enter the impellor through the center of the plate and the other part of materials falls down from outside of the plate. The materials thrown out earlier crush the materials down from outside, thus the materials crushed and re-crushed.

ModelVSI-7611VSI-8518VSI-9526VSI-1140
Capacity
(t/h)
Center and Sides Feeding120-180200-260300-380450-520
Center Feeding60-90100-130150-190225-260
Max. Feeding Size (mm)Soft Material35404550
Hard Material30354045
Rotation Speed(rpm)1700-18901520-16901360-15101180-1310
Double Motor Power (kw)110180264400
Overall Dimension
L×W×H (mm)
3700×2150×21004140×2280×24254560×2447×27785000×2700×3300
Weight (t)7.810.31625.6
Vibrating SensorInspection Range: 0.1-20mm/s Continual Adjustment
Hydraulic Oil PumpMotor Power of Double Oil Pump(Kw)2×0.31kw
Overall Dimension
L×W×H (mm)
820×520×1270
Power of Oil Tank Heater2KW

Intrduction of Joyal pcl sand making machine

The JOYAL PCL Vertical Shaft Impact Crusher is widely used for fine crushing and coarse grinding in mining, rocks, fireproof materials, glass raw material and metallurgy residues. The impact crusher is much more professional than other crushers in crushing hard and anti-abrasion materials such as carborundum, sintered bauxite, magnesite and so on. The Impact Crusher is usually used as sand making machine in the sand washing plant.

Features

1. Simply structure and low investment.
2. High efficiency and low
3. Scaleboard of the impeller is easy in maintenance and durable.
4. Appliable to fine and coarse grinding.
5. Slightly influenced by the moisture content of the material. The max moisture content is 8%.
6. Suitable for crushing materials of middle and high hardness.
7. Cubic shaped end products, high density of piling up and low iron pollution.
8. Working noise < 75db, and little dust pollution.

Working Principle

The materials fall into the crusher and be divided into two parts. One part goes into the high-speed-running impeller of the machine, and the other part goes around the impeller. The two parts materials bump into each other at a high speed and are crushed in this way under the centrifugal force. The end products go out from the bottom of the machine, and users can get the required products size after materials are screened by the vibrating screen.

ModelImpeller Speed (rpm)Max. Feeding Size (mm)Capacity (t/h)Motor Power (kw)Weight (t)Overall Dimension (mm)
PCL-6002000-26003012-302×305.62800×1500×2030
PCL-7501500-25003525-552×457.33300×1800×2440
PCL-9001300-17004050-802×5512.13750×2120×2660
PCL-10501100-14504570-1202×11016.54480×2450×2906
PCL-1250950-12004580-1602×132224563×2650×3176
PCL-1350800-120050120-2202×160265340×2940×3650


This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shanghai Joyal Machinery Co., Ltd.
Phone Number:
  86-21-68763311
Fax Number:
 86-21-68763366