Vortex Pump Application

This peripheral pumps are suitable fo use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the material from which the pump is made.

They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.

The pump should be installed in an enclosed environment , or at least sheltered from inclement weather.

1. Offer high pressure in relation to comparativedly low powers and which have particularly steady operating curves.
2. Qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.
3. For the correct function of the pump, use clean water or non -aggressive liquid only, without sand or other solid impurity.

Operating conditions:
1. Water temprature: Up to 60°C
2. Ambient temprature Up to 40°C
3. Total suction lift up to 9mt
4. Continuous duty
Motor:
1. Two-pole induction motor (n=2850r. P. M)
2. Insulation Class B
3. Protection IP44
Material:
1. Pump body: Cast iron
2. Pump support: Cast iron
3. Motor Housing: Alumnium
4. Impeller: Brass
5. Diffuser: Noryl
5. Shaft with rotor: 45# Steel, AISI416/304SS if request
6. Mechanical seal: Carbon/Ceramic