OEM security protection products

Overview

High quality and security mobile phone display stand can protect and display mobile with a stand-alone unit. It applies to cell phone supermarkets , telecom mobile unicom business hall, electronic digital city, digital camera store and all kinds of small and medium-sized electronic digital product exhibition hall of the security guard against theft.

Technical parameter of IES1102
1.Product size: 100*65*150mm

2: Single weight:240g

3:Main material :ABS/METAL

4.Shell Color: pearl white+silver
5.Internal Battery type: 3.7V rechargeable lithium battery.
6.External power adapter: DC5V 1000MA
7.Battery Standby Time: 2 weeks
8.Charge indicator: charging in red , full in green
9.Alarm sound: 105DB.
10.Alarm indication: LED red flashes.

Security function of IES1102

1:Three Contacts disconnection alarm.

2:Short Circuit Alarm Function

3:Remote Start and Disarm the Alarm.

4:Password function,Change the password freely

Charging function of of IES1102

1:Phone Charging and security by one cable.

2: Applies for Iphone and Samsung,interface optional

3: GB/EURO/ANSI/BS power plug available.

Components of IES1102

1.host base (rechargeable lithium battery inside)

2, Aalarm sensor probe(with a magnetic back, paste 3M adhesive. Extension cords )

3.harger and USB charging cable

4, Cell phone charging adapter cable

5, Remote control

6 Operation Manual

7 Additional 3M adhesive and screws

Photo of IES1102

Operation of IES1102

1.Clean the display case, then turn on switch on the bottom of Hot security cellphone /mobile phone display holder /stand with charging and alarm host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly)

2.Connect the charger of Hot security cellphone /mobile phone display holder /stand with charging and alarm with the alarm host,the other end into the power socket in preparation for a fixed monthly charge.

3.Tear off the 3 adhesive tapefrom the Anti-Theft Terminal product display and paste exhibit's back fastened

4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product

5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status

6.The installation is set up

Photo of anti-theft display stand for mobile phone

Our Factory Address: B,2/F, Factory Building, No.3, Pingxi 5 Rd, Nanping Science-Technology Industrial Park, Zhuhai City, Guangdong province, China.

Our Office Address: Rome 410, 4th floor of Guangsheng Commercial Town, No.3025 Zhuhai Avenue, Nanping, Xiangzhou District, Zhuhai, China.

Contact Us(BJT 8:30--17:30, except Sunday):

86+0756+6809610

....