submerged arc furnace of ferroalloy

0.1ton small melting furnace energy-conservation medium frequency induction furnace

(aluminum shell with machine tilting Molten Brass)

Model number:rated capacity of furnace 0.1t,rated power of medium frequency supply 100KW.Complete set supply range:furnace body 2set,furnace tilting device 2set,water cooling cable (2.4m) 4set, low voltage control and medium frequency supply cabinet 1set, capacitor cabinet (open type) 1set, water bank of power cabinet 1 piece, water bank of capacitor cabient 1piece, water bank of furnace body 1piece, Crucible 1piece. spare parts of equipment: master control board 1piece, KK tube 1piece,KP tube 1piece. Technical specification:3-phase incoming voltage of medium frequency supply source 400V, output voltage of medium frequency supply 750V. Rated power 100KW. Fit out components:silicon-controlled rectifier (SCR) for KP tube 200A/1400V 6piece;KK tube 200A/1600V 4piece (connecting in series-parallel). Circuit breaker with universal 380V/400A.Furnace tilting type: Reducer drive,231reducer drive,trustiness,facility.Master control board:The control circuit used one single master control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, so avoided safe failure. This control circuit board is high degree of integration, the αangle automatic adjusted especially, that let power output of the equipment always was on constant condition, and electric power can be saved over 3% in comparison with same kind product. Safe start-up and automatic frequency-sweep.Customer service: Free debugging (at home), all the costs of seller’s experts go and work at abroad for return air tickets, accommodation and meals, will be borne by the buyer. The debugging time the buyer shall compensate the experts at USD 150 per day per engineer. The seller should be responsible for the scene testing; After normal melting the seller should be responsible to guarantee repair or change of the faulty components in 6 months, such as master control board,reaction,compensate capacitor,furnace tilting device,breaker,and furnace shell (Furnace leak wear steel, power less water, a sudden power-off problem caused by supply-side is not responsible for).Team of payment:buyer pay 30% of full value in advance, 70% balance paid before date of shipment by T/T .