Introduce

This product is used to replace the previous wired doorbell, or visual doorbell, etc.

Wireless visual doorbell can be installed beside the door. Indoor machine can be free to use with the stable signal intensity place. Indoor machine can be hung on the wall, closet, etc or be placed above the desk, tea table, table etc.

Wireless unlock connected to the electric lock is simple, save electricity lock module embedded intelligent lock or remote control locks, lock the indoor machine to connect the door machine, easy to use, easy to complete the visible interphone,

a key lock, users don't have to run to the door to open the door directly.

Features

(1)2.4GHz digital frequency hopping and encryption technology, transmission distance up to 200 meters at open area, robust anti-interference

(2)Has the infrared night vision clear visual doorbell, can monitor and photograph, motion detecting to record the images in the dark

(3)Indoor machine adopts 7 inch colorful LCD display to image

(4)The door machine has tamper alarm settings, rainproof function

(5)Hands-free calling and intercom, open electric lock button

(6)Indoor machine built-in 16 chord rings, so you can choose the bell

(7)Indoor machine can display the date and time

(8)Indoor machine can be active and automatic take pictures, and pictures record picture time, it can automatically saved to the SD card

(9)Support for human motion detecting function, it can be set to detect sensitive. When objects move in monitoring range, the indoor machine will open the video function (not ring the bell), and start the video (video time can be selected). If 30 seconds without any buttons, it will enter sleep mode. Support motion detection. When the visitor comes close to the peephole within 1.5 meters, the indoor monitor will start to work and take one photo soon. If no action is taken for 10 seconds after that, it will enter into sleep mode.

(10) Brightness and talk volume are adjustable

(11) One indoor machine can be monitored at most four door machine, four door machine can be set to the doorbell or monitoring, video

Installation method

- Put the outdoor machine's waterproof cover fixed on the wall,and connect the power supply ( fit on li-ion batteries) make the top yoke of outdoor machine get stuck with the top card slot of waterproof cover, and then use a phillips screwdriver to twist the bottom of door machine!

- Choose hanging indoor machine way, the iron is in a state of up upwards, then connected power supply, fixed indoor machine in the wall, put indoor machine in the card slot, and hold the indoor machine clamping down!

- Select set way, adjust the stents to the suitable position (there are three Highly), then connect the power, put machine on the support!

E-lock installation

This system has the function of the lock, supporting power and no-power electronic lock.

The connection of electric control lock this system is very simple in the system, it is just ok that use the control line of electric lock connected to the corresponding types host interface of the outdoor machine.

Note the wire connected unlock controller of outdoor machine is well, press the indoor machine unlock key to open the lock!

Work environment

(1)Working temperature range:45-+55°C

(2)Working humidity range :no more than 85%

(3)Should be installed in the dry ventilated place

(4)Shoule be installed in low dust and palace without direct sunlight

(5)Don't be installed in too strong magnetic field around.