40W homely aluminum electric mosquito killer lamps

Method of use and maintenance:
1. This product using the voltage 220 v, 50 hz third line socket ground wire must be properly installed.
2. Miewenying apparatus should be placed in indoor places, children is not easy to met cannot use

conductive stuff into high voltage network, to avoid the electric shock.
3. Miewenying apparatus should be placed at an altitude of 1.5 meters to 2 meters can achieve the best

catch out the effect, avoid direct light and air meet before on the electric fan in the strong breeze.
4. When the electric shock mosquito musca "crack" sound is a normal phenomenon, made by flies

residue clean-up must cut off power supply and grid short-circuit rose edge put qing yu, after the

network down, the network is separated from the fuselage, the grid can be regular cleaning, clean up

dust on the light tube, to induce out the effect

Caution:

1,Do not touch the electrical web with hand or electricity conducting materials.

2,The pest killer must be placed at least one meter away from the flammable substance such as Gasoline

and petroleum

3,Clean the base if there are too many dead mosquitos,Files and pests.

4,Remember to disconnect the electrical source before you change the electric bulb.

5,Please switch off the pest killer when you go out

6,Moisture can damage and short-circuit this electronic appliance.