All

Epoxy Primer Paint

Location:
Taichung, Taiwan
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Chemicals > Paint

Product Description

Epoxy Primer Paint

1. Tough film, good tensile strength and adhesion.

2. Excellent resistance to fresh and sea water.

3. Excellent resistance to chemical, solvent and oil.

4. Very fast drying and excellent adhesion.

5. Very good adhesion with galvanized steel, aluminum,

alum-alloy metal and stainless steel.

6. Very good resistance for abrasion 1

Product Standard

Epoxy Primer

TYPE

A two-pack, special alloy primer based on epoxy resin, hardener and special pigments

USES

Uses for galvanized steel, aluminum, alum-alloy metal and stainless steel.

CHARACTERISTICS

1. Tough film, good tensile strength and adhesion.

2. Excellent resistance to fresh and sea water.

3. Excellent resistance to chemical, solvent and oil.

4. Very fast drying and excellent adhesion.

5. Very good adhesion with galvanized steel, aluminum,

alum-alloy metal and stainless steel.

6. Very good resistance for abrasion 1

COLOR

Gray,Red,White

GLOSS

Flat

WEIGHT

Above 1.1kg./L (Mixture)

VISCOSITY (25 °C)

70 - 90 KU (Mixture)

DRYING TIME (25 °C)

Set-to-touch 2Hrs. Dry hard 17 Hrs. Fully cured 3 days.

OPTIMUM FILM THICKNESS

Wet 100μ(microns) Dry 40μ(microns)

MIXING RATIO

Base : Hardener = 5 : 1(by wt.)

POT LIFE (25°C)

8 Hrs. (Mixture)

NON-VOLATILE CONTENT

Above 70%(Mixture)

THINNER

Epoxy Thinner

THINNING RATE

5~10%

APPLICATION METHOD

Spray, Brush, Roller.

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

NOTE

Mix base and hardener according to mixing ratio and

stir thoroughly; allowing the induced time for 10~20 minutes before application.

Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly Avoid applying the paint in rainy or humid weather,

Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried.

4. All equipment must be cleaned immediately after use.

5. When used inside tanks, sufficient ventilation must be

provided.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 BUO GUH PAINTS CO., LTD.
Phone Number:
  886-4-24065996
Fax Number:
 886-4-24070510
 
 

Resources